Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
* The “ ” key will not be displayed for some patterns. Changing the size of characters and frame patterns 312 * The sizes of characters and frame patterns can be changed as desired. 1. Touch “SET”. 2. Touch ”ENLARGE/REDUCE” 3. Touch “ENLARGE” to make the character or frame pattern larger, and touch “REDUCE” to make it smaller. If you touch “RESET”, the pattern size will return to the original size. 1 “ENLARGE” key 2 “RESET” key 3 “REDUCE” key * Characters can be enlarged and reduced to sizes ranging from “L” to “S”. * The enlargement sizes for frame patterns will vary according to the pattern. * Refer to page 43 for instructions on how to use other keys in this screen. Changing thread density of the stitch on characters and some frame patterns 1. 2. 3. 123* 1 The thread density adjustment is not available for all patterns. Patterns other than the characters and some frame patterns are not adjustable. Touch “SET”. Touch “THREAD DENSITY”. The thread density of the stitches will become farther apart (coarser) each time “–” key is touched. The thread density of the stitches will become closer together (finer) each time “+” key is touched. STD (standard) + (stitches closer together) – (stitches farther apart) The normal setting is “STD” (standard). EMBROIDERING EMBROIDERING EMBROIDERINGMACHINE ERROR USING USING USING CONTENTS EMBROIDERING MAINTENANCE TROUBLESHOOTING PATTERNS KNOWLEDGE MESSAGE FRAME EXTRA-SMALL FRAME (OPTIONAL) FRAME (OPTIONAL) (OPTIONAL) 47 SEWING A BASIC EMBROIDERY PATTERN Embroidering multi-color patterns 1. * * 2. 3. 4. (1) (2) (3) (2) (3) (3) When a pattern is selected it is broken down into color diagrams on the screen. The order of embroidering is shown left to right. The diagram on the left is for the first thread color. Thread the first color. (See page 16 – 17) When the “START/STOP” button is pressed, the first part of the pattern (1) will be sewn and then the machine will stop automatically. Be sure to raise the presser foot before changing the thread. When embroidering is completed for this color, the screen display will automatically move to the left one position. Replace the upper thread with the next color and press the “START/STOP” button. The second part of the pattern (2) will be embroidered and the machine will then stop automatically. Replace the upper thread with the next color and press the “START/STOP” button. The third part of the pattern (3) will be embroidered and the machine will then stop automatically. Trim any excess thread. Embroidering single color patterns 1. Thread the machine. (See page 16 – 17) 2. Install the embroidery frame. (See page 20 – 22) 3. Lower the presser foot. 4. Press the “START/STOP” button to sew the pattern: the machine will stop automatically when it is finished. 5. Raise the presser foot. 6. Trim any excess thread. EMBROIDERING EMBROIDERING EMBROIDERINGMACHINE ERROR USING USING USING CONTENTS EMBROIDERING MAINTENANCE TROUBLESHOOTING PATTERNS KNOWLEDGE MESSAGE FRAME EXTRA-SMALL FRAME (OPTIONAL) FRAME (OPTIONAL) (OPTIONAL) Embroidering a single color pattern when “MULTI COLOR” is displayed 1. Touch “MULTI COLOR” to change to the single color mode. If the “START/STOP” button is pressed, a single color of the pattern will be embroidered and then the machine will stop automatically. * It is not possible to change between multi color mode and single color mode if “MULTI COLOR” is not displayed on the screen. 2. Trim any excess thread. EMBROIDERING EMBROIDERING EMBROIDERINGMACHINE ERROR USING USING USING CONTENTS EMBROIDERING MAINTENANCE TROUBLESHOOTING PATTERNS KNOWLEDGE MESSAGE FRAME EXTRA-SMALL FRAME (OPTIONAL) FRAME (OPTIONAL) (OPTIONAL) 49 Embroidering characters that extend beyond than one frame * This function is useful when there are many characters to embroider and you cannot embroider them all in the same frame. Example: ABCDE in large size 1. Input “ABC”, then touch “SET” and then “LAYOUT”. After this, touch “START/ CENTER” to switch to “START”. 2. Press the “START/STOP” button to start embroidering. When embroidering has finished, the machine will sew the finishing position automatically. You can use the finishing position as the starting position for the characters to be embroidered next when the fabric is re-framed with the finishing point and last character just inside the left edge of the frame. 1 Finishing position 3. Input the remaining letters “DE”, and then touch “START/CENTER” to select “START”. 4. Touch the arrow keys to move the start point of the needle to the finishing position of the last character and then press the “START/STOP” button to start the machine. 1 Finishing position (Use it for the starting position of “DE”.) Finished pattern EMBROIDERING EMBROIDERING EMBROIDERINGMACHINE ERROR USING USING USING CONTENTS EMBROIDERING MAINTENANCE TROUBLESHOOTING PATTERNS KNOWLEDGE MESSAGE FRAME EXTRA-SMALL FRAME (OPTIONAL) FRAME (OPTIONAL) (OPTIONAL) 51 CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE ERROR MESSAGE TROUBLESHOOT...
Dieses Handbuch ist für folgende Modelle:Nähmaschinen - PE-170D (6.9 mb)
Nähmaschinen - PE-180D (6.9 mb)