Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Select the appropriate frame, and hoop the fabric and stabilizer in the embroidery frame. (Refer to “Attaching Iron-On Stabilizer (Backing) to Fabric” on page 90.) For precautions concerning the fabric, refer to page 34. Note . If the fabric is not taut, the pattern may be misaligned or the fabric may pucker. Follow the procedure described below to firmly stretch the fabric in the embroidery frame so that the fabric is not loose. In addition, be sure to work on a level surface when putting the fabric in the embroidery frame. Hooping the fabric in the embroidery frame 1Select an embroidery frame. From the sizes of embroidery frames indicated in the screen, select the embroidery frame that you wish to use. Embroidery frames that can be used appear darker ( ) embroidery frames that cannot be used appear lighter ( ). Memo . If the embroidery frame holder is not attached to the machine, the embroidering area will not display the correct frame size. (Refer to page 49.) ¦ Embroidery frame types There are four sizes of embroidery frames included with this machine. For details on the uses for each frame, refer to “Correctly Using the Embroidery Frames” on page 88. CAUTION Note . The embroidery frame indicators show all embroidery frame sizes in which the embroidery pattern can be sewn. Be sure to use an embroidery frame of the most suitable size. If the embroidery frame that is too large is used, the pattern may be misaligned or the fabric may pucker. (Refer to “Correctly Using the Embroidery Frames” on page 88.) Icon Name Embroidering area Extra-large embroidery frame 200 mm (H) . 300 mm (W) (7-7/8 inches (H) . 11-3/4 inches (W)) Large embroidery frame 130 mm (H) . 180 mm (W) (5-1/8 inches (H) . 7-1/8 inches (W)) Medium embroidery frame 100 mm (H) . 100 mm (W) (4 inches (H) . 4 inches (W)) Small embroidery frame 40 mm (H) . 60 mm (W) (1-1/2 inches (H) . 2-3/8 inches (W)) . If embroidery frames other than the four included frames are used, the embroidery frame may hit the presser foot and damage the machine, or cause injury to the user. EMBROIDERING TUTORIAL EMBROIDERING TUTORIAL ¦ Hooping fabric in the small embroidery frame The procedure for hooping fabric in the small embroidery frame is described below. The same procedure is used to hoop the fabric in the medium embroidery frame. For details on hooping fabric in the large embroidery frame and the extra-large embroidery frame, refer to “Hooping the Fabric” on page 91. 2 Loosen the screw on the outer frame. 1Screw 3 Place the fabric with the right side up on top of the outer frame. • The outer frame does not have a front or back side. Either side can be used as the front. 4 Press the inner frame into the outer frame. • Be sure that there are no wrinkles in the fabric after it is stretched in the embroidery frame. 5Lightly tighten the screw, and then pull the edges of the fabric. 6 Securely tighten the screw, and then check that the fabric is taut. • After stretching the fabric, lightly tapping it should produce a drum-like sound. • Firmly clamp together the inner and outer frames so that the bottom of the inner frame is lower than the bottom of the outer frame. 1 Inner frame 2 Outer frame 3 Bottom of inner frame • Using the included disc-shaped screwdriver, firmly tighten the screw. 1 Disc-shaped screwdriver The amount that the fabric is stretched and the use of stabilizer material differ depending on the type of fabric being embroidered. Try various methods to achieve the best embroidering results. (Refer to “Hooping techniques” on page 223.) Memo . This embroidery machine can also be used with the optional cap frames. (Refer to “Using the Optional Cap Frame” on page 225.) 8. Attaching the Embroidery Frame to the Machine 8. Attaching the Embroidery Frame to the Machine After hooping the fabric in the embroidery frame, attach the frame to the embroidery machine. CAUTION . If the embroidery frame is not correctly attached it may hit the presser foot and damage the machine, or cause injury to the user. 2 . When attaching the embroidery frame, make sure that the start/stop button is lit in red. If the start/stop button is flashing in green, the embroidery machine may start sewing. If the embroidery machine accidentally starts operating, injuries may result. . When attaching the embroidery frame, make sure that the embroidery frame does not hit any other part of the embroidery machine. Note . Before attaching the embroidery frame, check that there is enough thread in the bobbin. Attaching the embroidery frame Adjust the width of the embroidery frame holder to the size of the embroidery frame, and then attach the embroidery frame to the machine. As an example, the procedure for attaching the small embroidery frame is described below. 1 Loosen the two thumb screws on the embroidery frame holder. If the screw is too tight, please use the included disc-shaped screwdriver. 1 Left arm 2 Thumb screws • The left arm of the embroidery frame holder can be moved. • Only loosen t...