Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Cut carefully along the stitching and remove the thread. • If it is not cut right on the stitching, it will not be finished neatly. Stretch the base fabric on the embroidery e frame. f Set up the thread for appliqueing. Lower the presser foot lever, and press g (Start/stop button). • The position for the applique is stitched, and the sewing machine stops. 2 1 a Applique position b Base fabric • "APPLIQUE" will be displayed on the LCD. h Apply a thin layer of fabric glue or spray adhesive to the back of the applique piece, and attach it in the applique position. 152 SE-BrotherE_sgml.book Page 153 Monday, June 30, 2003 3:44 PM — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — i Lower the presser foot lever, and press (Start/stop button). j Follow the instructions on the LCD, and change thread colors as you sew. 4 Embroidering 153 SE-BrotherE_sgml.book Page 154 Monday, June 30, 2003 3:44 PM EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Convenient Functions Ways for fixing problems when there are mistakes in adjustments and colors for the pattern and convenient functions will be explained here. Adjusting the layout The pattern is normally positioned in the center of the embroidery frame. You can check the layout before starting embroidery and change the position and the size. a After selecting the embroidery pattern, press . • The screen for changing the pattern is displayed. b Press . • The layout screen is displayed. Check and adjust the layout. c 1 2 3 4 5 6 0 987 a Layout within the frame b Embroidery frame (M/S) used c 90 degree rotation key d Size key e Horizontal mirror image key f Stitch beginning key g Trial key h Change position key i Pattern size/position switching key j Embroidery size (cm) Embroidery frame size The size of embroidery frame that can be used is displayed. When the smaller mark is grayed out in the display, embroidery frame (small) cannot be used. Size key Increases/decreases the size of the embroidery. If is pressed, it returns to the previous screen. Decrease size Return to original size Increase size Pattern size/position switching key Switches between pattern size and position displays. When it is , the pattern size is displayed in the lower left (Example: ). When it is , the distance moved is displayed (Example: ). Change position key Moves the embroidery position up, down, left and right. Return to center position (when the pattern was moved with the change position key) • If you make a note of the values in the lower left when you change the size and position, you can sew with the same size and layout even if you have to turn the power back on in the middle of your work. 90 degree rotation key Rotates the embroidery 90° each time. The direction of the arrow points to the top of design. 154 Convenient Functions 155 4 ———— ———— ———— ————— ———— ————— ———— ————— ———— ————— ———— ———— CAUTION dPress (Back key) to return to the original screen. Memo .. When the power is turned off, the layout returns to the original setting. Storing characters The characters you entered can be stored in the sewing machine memory. Since the stored characters will not be erased when the power is turned off, you can always recall them for embroidery. This is convenient for storing names and the like. You can store up to five groups. ¦ Storing characters aAfter inputting the characters to be stored, press (Memory key). .. The screen for selecting the storage location (pocket) is displayed. bSelect the pocket for storage from pockets 1 - 5. indicates an empty pocket. indicates a pocket where a character is already stored. .. The selected pocket is shown in reverse highlighting. cPress . .. "Saving..." appears while the character is being stored in the pocket. • Do not turn off the sewing machine while a character is being stored, otherwise the character data may be lost. Horizontal mirror image key Mirrors the embroidery left and right. When it is , it cannot be used. Stitch beginning key Switches the position for beginning stitching between center/lower left of the design. Trial key Moves the embroidery unit carriage, and checks the embroidery range. . Never lower the needle when the embroidery frame is moving. The needle could be broken or bent. . If the movement for the stitching position exceeds the range where embroidery can be done, you can not use that size embroidery frame. Check the display for a frame that can be used and use it. If a frame other than the ones displayed is used, it could result in injury. SE-BrotherE_sgml.book Page 155 Monday, June 30, 2003 3:44 PM SE-BrotherE_sgml.book Page 156 Monday, June 30, 2003 3:44 PM EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — ¦ Recalling stored characters. Recall stored characters. Press (Memory key). a This can be pressed no matter what screen is being displayed. • The pocket selection screen i...
Dieses Handbuch ist für folgende Modelle:Nähmaschinen - HE-120 (5.35 mb)