Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Try to use Under sewing for wide areas, in order to prevent shrinking during stitching. Depending on the shape of the region, however, it may not be possible to make this setting. On: Under sewing will be done Off: Under sewing will not be done Density Sets the number of lines per mm. Range: 1 - 7 lines per mm (25 - 178 lines per inch) Default: 4.5 lines per mm (114 lines per inch) Direction Type Specifies the type of sewing direction. Constant: Sews at a fixed angle. The angle is specified by the Angle setting. Variable: Varies the sewing direction according to the object being sewn. Angle Specifies the sewing angle. (If Variable is selected as the Type setting, this setting is not available.) Range: 0 - 179 degrees Default: 45 degrees 0° 45° 90° 135° 179° Pull Compensation Lengthens the sewing region in the stitch pattern’s sewing direction to prevent pattern shrinkage during sewing. Range:0 - 2 mm (0.00 - 0.08 inch) Default:0 mm (0.00 inch) Contents Before Getting Design Layout ProgrammableStitch Quick Alphabetic (button) (button) (button) (button) (button) (button) (button) (button) 207 Fill stitch only: Step Pitch Sets the pitch of the steps. Range: 1 - 10 mm (0.04 - 0.39 inch) Default: 4 mm (0.16 inch) Frequency Sets the spacial frequency steps. Range: 0 - 99% Default: 30% Step pitch 0% 30% Programmable fill stitch only: Pattern Select a pattern for Programmable Fill Stitch. Click Select Pattern, and the Browse dialog opens. Select the folder containing the pas file you want to open. Scroll through the available stitch patterns and double-click the desired pattern or click OK to select the pattern Pattern Size Width Sets the stitch pattern width. Range: 5 - 10 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Height Sets the stitch pattern height. Range: 5 - 10 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Direction Sets the offset arrangement of the pattern, and sets the direction of offset as Row/Column. Offset Value When the pattern’s arrangement is offset, sets the amount of offset. Range: 0 - 99% Default: 0% Direction Allows you to rotate the angle of the stitch patterns. Range: 0 - 359 degrees Default: 0 degrees Motif Stitch only: Use Pattern Selects whether to use pattern 1 or pattern 2 for Motif. If you choose to use both patterns, the data is created so that sewing is alternated between them after each row. Pattern1 only: Uses only pattern 1 (Default) Pattern2 only: Uses only pattern 2 Pattern1 and 2: Uses pattern 1 and pattern 2 Pattern Select a pattern for Motif sewing. Click Select Pattern, and the Browse dialog will display. Select the folder containing the pmf file you want to open. Scroll through the available stitch patterns and double-click the desired pattern or click OK to select the pattern. Pattern Size Width Sets the pattern width (the direction along the line). Range: 2 - 10 mm (0.08 - 0.39 inch) Default: 5 mm (0.20 inch) Height Sets the pattern height (the direction perpendicular to the line). Range: 2 - 10 mm (0.08 - 0.39 inch) Default: 5 mm (0.20 inch) Contents Before Getting Design Layout ProgrammableStitch Quick Alphabetic (button) (button) (button) (button) (button) (button) (button) (button) H-Arrange (Horizontal Arrange) Sets the horizontal arrangement of the pattern. For patterns like , patterns will be arranged along the line as shown below. Normal: Mirror: Alternate: V-Arrange (Vertical Arrange) Sets the vertical arrangement of the pattern. For patterns like , patterns will be arranged along the line as shown below. Normal: Mirror: Alternate: Row Offset When the pattern arrangement is offset, sets the amount of offset for each row. Range: 0 - 10 mm (0.06 - 0.20 inch) Default: 0 mm (0.10 inch) Direction Allows you to rotate the angle of the Motif patterns. Range: 0 - 359 degrees Default: 0 degrees Run Pitch Sets the pitch of the sewing. Range: 1 - 10 mm (0.04 - 0.39 inch) Default: 2 mm (0.08 inch) Cross stitch only: Size Sets the horizontal and vertical size of the pattern. Range: 1.5 - 5 mm (0.06 - 0.20 inch) Default: 2.5 mm (0.10 inch) Times Sets the number of times that the pattern will be sewn. Sews twice per time. Range: Single, Double, Triple Default: Single Feathered Edge only: Feathered Side Sets which side of the sewing direction to apply the Feathered edge setting to. When creating data in Manual Punch mode, the Topside has organization points 1-3, and the Bottom side has organization points 2-4. Top: Feathered Edge is sewn on the Topside. Bottom: Feathered Edge is sewn on the Bottomside. Pattern Selects a pattern to use with the Feathered Edge. Click Select Pattern, and the Browse dialog will open. Scroll through the available Feathered Edge patterns and double- click the desired pattern or click OK to select the pattern Max length Sets the length of feathered edge. Range: 0.2 - 100 mm (0.01 - 3.94 inch) Default: 3 mm (0.12 inch) Contents Before Getting Design Layout ProgrammableStitch Quick Alphabetic (button) (button) (button) (button) (button) (button...