Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Nähmaschinen - PR1000e (27.11 mb)
Nähmaschinen - PR1000e (26.87 mb)
Anleitung Zusammenfassung
232 BASIC SETTINGS AND HELP FEATURE Using the Settings Key BASIC SETTINGS AND HELP FEATURE Using the Settings Key Touch (settings key) to change many of the basic embroidery machine settings. Understanding the settings screen There are five pages in the settings screen. Touch and in the lower-center of the screen until the desired page is displayed. The key appears on all pages. ¦ Page 1 2 3 4 5 6 1 1 Touch to quit specifying settings. The settings are confirmed and the screen that was displayed before the settings key was touched appears again. 2 The guides (type of embroidery frame holder, embroidery frame size, centerpoint marker and grid) for the pattern display area can be specified. (Refer to page 220.) 3 Changing the thread color display The color information in the thread color sequence display and the needle bar thread information can be switched to the color name, the thread brand and color number or the sewing time. (Refer to page 222.) 4 “PES” Thread Code You can display the thread color for “PES” format data according to the machine setting, or setting from the embroidery editing software. (Refer to page 223.) 5 Thumbnail Size Specifies whether the size of image keys that appear when selecting a pattern from the pattern list screen are displayed “Small” or “Large”. (Refer to page 224.) 6 Embroidery Background Color/Thumbnail Background Color Depending on the color of the embroidery, changing the background color of the pattern display area and thumbnails may make them more visible and easier to select. (Refer to page 224.) ¦ Page 2 7 8 9 0 A B 7 “DST” Setting Specifies whether or not jumpstitches are cut. In addition, when using Tajima embroidery data (.dst), you can specify whether or not the thread is cut according to the specified number of jump codes. (Refer to page 225.) 8 Short Stitch Delete Specifies the length of short stitches that are to be deleted. (Refer to page 226.) 9 Thread Tail Specifies the length of upper thread that remains threaded through the needle after the thread is trimmed (length of thread passed through the eye of the needle). (Refer to page 227.) 0 Basting Distance Specify the distance between the pattern and the basting stitching. (Refer to page 126.) A Applique Distance Specify the distance between the applique pattern and the outline. (Refer to page 127.) B Use the application check when running an application. Note . If the settings for “DST” Setting 7 or Short Stitch Delete 8 are changed from the previous setting, the new settings are only applied to the next embroidery. ¦ Page 3 C C Reserved Needle A specific thread color can be set to a needle bar. The specified color remains assigned to the needle bar specified here until the setting is cancelled. You can also specify the maximum sewing speed for a needle bar. This feature is not accessible through the embroidering screen. (Refer to “Reserved Needle Bar and Sewing Speed Settings” on page 145.) ¦ Page 4 D E F G H I J D Screen Saver Select the length of time until the screen saver appears, and change the image of the screen saver. (Refer to page 227.) E Opening Screen The machine can be set so that the opening screen is either displayed (“ON”) or not displayed (“OFF”) when the machine is turned on. F Spool Stand LED Specifies the setting of spool stand LED function. Spool stand LED informs when the machine starts sewing, needs changing thread and the error occurs, etc.(Refer to page 230.) G Light The brightness of the sewing light can be adjusted. (Refer to page 20 or 229.) H Speaker The volume of operation sounds and alarm sounds can be adjusted. (Refer to page 21 or 229.) I Thread Sensor Set “Thread Sensor” to either “ON” or “OFF”. (Refer to page 230.) J Mouse Pointer Change the shape of the pointer when a USB mouse is used. (Refer to page 231.) Using the Settings Key 219 BASIC SETTINGS AND HELP FEATURE BASIC SETTINGS AND HELP FEATURE ¦ Page 5 K L M N O P Q R K Link function Set the Link function on or off. (Refer to “Sending Embroidery Patterns From a Computer to the Machine (Link Function)” on page 176) L Manual Color Sequence Set the Manual color sequence on or off. (Refer to “Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence)” on page 132) M Units of Measure Enables the units of measurements that appear in the screens to be changed. (Refer to page 231.) N LANGUAGES Enables the display language to be changed. The keys and messages appear in the selected language. (Refer to page 231.) O The Total Count counter shows the total number of stitches sewn, and the Trip Count counter show the number of stitches that have been sewn since the machine’s last maintenance. P The Total Time counter shows the total amount of time that the machine has been used, and the Trip Time counter shows the amount of time that the machine has been used since its last maintenance. Use counters O and P as a standard for performing periodic maintenance and for receiving maintenance for the machine. Q The “No....