Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
INSTALLATION: FIGURE 2 FIGURE 3 FIGURE 5FIGURE 4 FIGURE 1 OPERATION: ShredSafe™ technology is an added safety feature incorporated in this particular model. It is a new technology where the shredder is able to detect forced entry and automatically cuts the power off, preventing further shredding. To begin shredding, locate the switch on the unit and select the “Auto” mode (FIGURE 2). The Green LED light indicates the shredder is “On” and ready to use. Press the designated “push open” area on cover to tilt open and expose the paper feed slot (FIGURE 3). The cover will click into a preset position for safe shredding.* Paper feeds from both left and right sides. With the feed slot now open, you can shred sheets of paper or 1 credit card per pass (FIGURE 4). When shredding is completed, you can press the designated “push close” area on the cover to tilt shutthe paper feed slot (FIGURE 5). It is recommended to have the paper feed slot closed when shredder isnot in use. This will prevent any objects from getting into the feed slot and accidentally shredded. *Be sure to not tilt open the cover completely beyond the preset position, otherwise theShredSafe™ power cut off feature will be activated and the shredder will be inoperable. The green “Power On” light will be off, indicating that the shredder is NOT READY for use. Auto: This setting allows the shredder to be automatically started by inserting paper into the shred opening. Always feed the paper in as straight as possible. Paper feeds from both left and right sides. When the paper has passed through, the shredder will automatically stop. (FIGURE 2) Off: This setting turns off all features of the shredder. For safety reasons, we recommend that you leave the shredder in the "Off" position whenever the shredder is unattended or not in use. (FIGURE 2) Rev: In the unlikely event of a paper jam, the reverse setting can be used to help clear the cuttersof paper that has not passed through. Never attempt to clear a jam by using the reverse functionuntil you have emptied the wastebasket. (FIGURE 2) I R O Never shred plastic (except credit cards), any hard materials, continuous forms, newsprint, or anything with adhesives including labels and envelopes. While this shredder will shred staples, it is recommended that you remove them whenever possible inorder to extend the life of your shredder. Only shred credit cards by feeding them vertically within the designated area. Never feed more than one credit card at a time. LED Status indicators: Power On (green light) Overheat (red light) Sheet Capacity 7 FOLDED sheets of20lb. bond paper* Paper Entry Width 6.3 in. / 160 mm Paper Shred Size 0.19 in. x 1.78 in. pieces4.8 mm x 45.2 mm pieces Credit Card Capacity 1 at a time Voltage 120V/60Hz – 3.5A 5 6 LIMITED PRODUCT WARRANTY: Swinton Avenue Trading, Inc. Limited Product Warranty This limited warranty covers the original purchase of new product used for normal commercial, personal or household use. Swinton Avenue Trading, Inc. (SAT) warrants its products will be free from defects in materials and workmanship (normal wear and tear excepted), for one (1) year from the date of purchase, except as provided below. SAT, at its option, will replace with a comparable product, free of charge, any product which fails under normal use as a result of such defect. This warranty does not apply to damage caused by fire, accident, negligence, misuse, improper cleaning or othercircumstances not directly attributable to manufacturing defects. Additionally, the cutting cylinders are warranted for a period of 5 years from the original purchase date and will be replaced without charge for material or labor if found by SAT to be defective. Proof of purchase is required in the form of a receipt (copy or original) to validate warranty. If you do not have a copy of your store receipt and paid using a check or a major credit card, a copy can beobtained from Office Depot’s receipt retrieval department at (561)-438-7739. If SAT chooses to provide a refund for such product, it will be fulfilled in the form of an Office Depot Merchandise card. Claims fulfilled in this manner take approximately 90 days to process. SAT PROVIDES THIS LIMITED WARRANTY IN LIEU OF ALL OTHER WARRANTIES EITHER EXPRESS OR IMPLIED. EXPRESSLY EXCLUDED ARE ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. SAT’S SOLE OBLIGATION AND THE USER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT AT SAT’S SOLE DISCRETION AND COST, OF PRODUCT OR COMPONENTS. IN NO EVENT SHALL SAT, ITS AFFILIATES, SUBSIDIARIES OR PARENT COMPANIES BE RESPONSIBLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES ARISING OUT OF A CLAIM OF DEFECTIVE PRODUCT EVEN IF SAT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES OR PROVINCES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTIAL OR CONSEQUENTIAL DAMA...