Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Fellowes Dateigröße: 79.74 kb Dateiname: Unterrichtssprache:

The cover over the inlet will ordinarily prevent this false indication from occurring. If the shredder is in a position where sunlight or a strong lamp shines on the front of the shredder from such a low position that the light reaches down into the inlet: • Move the shredder or the light to a different position, OR • Turn the rocker switch to the off position when not in use. CAUTION: Do not insert aerosol cleaners or lubricants into or around the machine. Some agents may combust, causing serious injury. A B C D E F A B C D E F A B C D E F Parts Identification 1) Indicator Lights 2) Rocker Switch 3) Cover 4) Cabinet 5) Cabinet Access Door 6) Paper Feed Opening 7) Power Supply Receptacle 8) Circuit breaker (models 320-380 only) Technical Specifications Model 220 220CC 280 280CC Cutting Style Strip Cross Cut Strip Cross Cut Shred Size Inches Millimeters 1/4 5.99 5/32 3.9 5/32 x 1-1/4 3.9 x 32 1/4 5.99 5/32 3.9 5/32 x 1-1/4 3.9 x 32 Sheet Capacity 8-1/2” x 11” 20 lb. A4/70gr 14-16 16-18 12-14 14-16 8-10 9-11 14-16 16-18 12-14 14-16 8-10 9-11 Speed 115V, 60Hz 22 FPM 22 FPM 22 FPM 22 FPM Entry Width Inches Millimeters 10 (254) 10 (254) 15 (381) 15 (381) Motor Power 120V 220-240V 1/4 hp (0.15 kW) 1/4 hp (0.15 kW) Input voltage (Depending on country) 100V 50/60Hz 120V 60Hz 220-240V 50Hz 100V 50/60Hz 120V 60Hz 220-240V 50Hz Dimensions Inches Millimeters 32-3/8 H x 17-3/4 W x 16 D 822 H x 451 W x 406 D 32-3/8 H x 23 W x 16 D 822 H x 584 W x 406 D Weight Pounds Kilograms 73 83 33 37.6 90 100 40.9 45.5 Waste Container Vol. Gallons Liters 18.24 69.0 24.75 93.7 Reorder bag number 36054 36056 A B C D E F Technical Specifications Model 320 320CC 380 380CC A B C D E F Cutting Style Strip Cross Cut Strip Cross Cut Shred Size Inches Millimeters 1/4 5.99 5/32 3.9 5/32 x 1-1/4 3.9 x 32 1/4 5.99 5/32 3.9 5/32 x 1-1/4 3.9 x 32 Sheet Capacity 8-1/2” x 11”, 20 lb. A4/70gr 18-20 20-22 16-18 18-20 10-12 12-14 18-20 20-22 16-18 18-20 10-12 12-14 Speed 115V, 60Hz 22 FPM 22 FPM 22 FPM 22 FPM Entry Width Inches Millimeters 10 (254) 10 (254) 15 (381) 15 (381) Motor Power 120V 220-240V 2/5 hp (0.28 kW) 2/5 hp (0.28 kW) Input voltage (Depending on country) 100V 50/60Hz 120V 60Hz 220-240V 50Hz 100V 50/60Hz 120V 60Hz 220-240V 50Hz Dimensions Inches Millimeters 32-3/8 H x 17-3/4 W x 16 D 822 H x 451 W x 406 D 32-3/8 H x 23 W x 16 D 822 H x 584 W x 406 D Weight Pounds Kilograms 78 88 35.3 39.8 92 102 41.8 46.3 Waste Container Vol. Gallons Liters 18.24 69.0 24.75 93.7 Reorder bag number 36054 36056 Installation • Plug one end of the enclosed power cord (inside the waste box) into the power supply receptacle in the back of the shredder. • Screw casters into the nuts provided on the underside of the shredder. • Operate this product only from the type of power source indicated on the marking label. • Install the paper shredder so that the plug is easily accessible. • Operate shredder only in the upright position. • Set up paper shredder so that the ventilation slots are unobstructed. To ensure sufficient ventilation of the shredder, maintain a minimum distance of 4” (10 cm) from walls or furniture on each side of the shredder. Caution Never insert hand, fingers or any foreign objects into the feed opening. Serious injury may result. Keep all loose articles of clothing, ties, jewelry, long hair or other loose objects away from feed opening. Injury may result. Always turn off and unplug the machine before moving, servicing, cleaning or any other conduct other than normal operation. Serious injury may result. Operation Read operating instructions before putting shredder into operation. Insert power cord into power supply receptacle on the back of the shredder. Insert plug into power outlet. Install waste bag for shredded material • Open door and completely remove wastebox from cabinet. • Fold new bag around frame. Allow bag to overhang waste box by approximately 7” (20 cm). • Slide box with bag back into cabinet. • Close cabinet door. Switching equipment On • Press rocker switch to (I) • Switch locks in “on” position • Equipment is ready for operation (stand by) • Green LED lights • Feed paper • The shredding process is started by photo-cells in the paper feed opening. Insert paper and shredding begins automatically. • When the shredding is complete, the cutting system automatically stops after approximately 3 seconds. Switching equipment Off • Press rocker switch to (O) A B C D E F Checklist for Inoperative Machines A B C D E F All Machines If no indicator lights are lit: • Make sure the plug is securely inserted in the receptacle on the back of the machine and into the wall outlet. • Make sure the shredder is on (switch in “I” position). If both the red and greenlights are on: Waste Box Full: • Press rocker switch to “O” to stop the cutting system. • Remove wastebox from inside cabinet and empty. • Return wastebox, close door and resume operation. Door Ajar: • Make sure door is completely closed. • If the door is opened while the motor is running,...

Herunterladen

Geben Sie zwei Ziffern: