Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Fellowes, modell 520C

Hersteller: Fellowes
Dateigröße: 138.11 kb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

C) If the product has been exposed to rain. D) If the product does not operate normally when the operating instructions are followed. E) If the product has been dropped or the casing has been damaged. 13. Keep out of the reach of children. 14. This shredder should be operated only with an operator in attendance. 15. Do not use flammable synthetic oil, petroleum- based products, or aerosols of any kind on or near shredder at any time. 2. Parts Identification 1 23 POWERSHRED 4 520 520C 8 9 10 1. Membrane keyboard 6. Caution label 2. Security key lock 7. Cabinet (520HS only) 8. Cabinet access door 3. Cover 9. Paper feed opening 4. Main power switch 10. Paper guide roller 5. Serial Label 5 7 6 Fellowes Manufacturing Co. 1789 Norwood Avenue Itasca, IL 60143 USA Model: Serial #: Voltage: Motor: Current: Manufactured: R R 4 Ready for operation green LED Cut material bag full red LED Paper jam – electric motor overloaded red LED Front door not closed red LED On shredder is switched on – cutting system runs forward Stop cutting head stops – shredder remains ready for operation Reversing cutting system runs in reverse Edition 01/03 Paper shredder 520C 3. Technical Specifications Model 520 Model 520C Cutting style Strip cut Cross cut Shred size 5/32" (3.9 mm) 1/4" (5.8 mm) 5/32" x 2" (3.9 x 50 mm) *Sheet capacity U. S. (75 g/m2) Europe (70 g/m2) 28 35 38-40 50 26-2832 Speed 32 FPM (143 mm/s) 25 FPM (100 mm/s) Entry width 16"(400 mm) Motor power 120 V / 60 Hz units: 2.25 HP 230/240 V / 50 Hz units: 1,6 kW Input voltage (Depending on country) 120 V, 60 Hz 230 V, 50 Hz Dimensions (H x W x D) 361/4" x 231/2" x 181/2" (921 x 597 x 470 mm) Weight 179 lbs. (81 kg) 206 lbs. (93 kg) Waste container volume 41.2 gallons (156 liters) Noise level *Paper DIN 19307 SM 4a – 70 In idle 60dB Under load 68 dB strip cuts and 75 dB cross cuts Edition 01/03 520C Paper shredder 4. Supplies – Bags for cut material (Packed in dispenser carton, 50 or 100 bags to a roll depending on size. Contact Fellowes or your local Fellowes dealer for the stock number of the bag that fits your machine.) – Cutting block oil for cross-cut units Stock # 35250 5. Installation – Refer to separate set–up instructions for proper assembly – Operate this product only from the type of power source indicated on the marking label – Install the paper shredder so that the plug is easily accessible – Shredder must be operated only in upright position – Set up paper shredder so that the ventilation slots are unobstructed. To ensure sufficient ventilation of the shredder a minimum distance of 4" (10 cm) to the wall or to the furniture must be maintained. 6. Caution Never insert hand, fingers or any foreign objects into the feed opening. Serious injury may result. Keep all loose articles of clothing, ties, jewelery, long hair or other loose objects away from feed opening. Injury may result. Always turn off and unplug the machine before moving, servicing, cleaning or any other conduct other than normal operation. Serious injury may result. 7. Operation Read operating instructions before putting shredder into operation Insert plug in power outlet Install waste bag for shredded material – Open front door and completely remove bag frame from cabinet – Fold new bag around frame. Allow bag to overhang frame by appoximately 7" (20 cm). – Slide frame with bag back into cabinet – Close cabinet door. Switching equipment on 0 I – Set main power switch (located on back of shredder) to ON (1) position. – (On the 520 HS, the security key lock switch must also be turned on) Green LED lights • Equipment is ready for operation (standby) To shred paper – Press green arrow button at least 4 sec • Cutting system runs in forward direction – Insert paper into the paper feed opening • Shredding occurs or – Feed paper • The shredding process is started by a photo– cell in the paper feeding opening When the paper feeding opening is free again, the cutting system automatically switches off after approx. 3 sec. and returns to standby. When shredding is completed – Push stop button • Cutting system stops • Equipment returns to "ready-to-operate" (standby) condition Switching equipment off 0 I – Set main power switch (located on back of shredder) to OFF (0) position. Edition 01/03 Paper shredder 520C Feeding continuous forms – Pass the leading edge of the form under the paper guide roller (1) and into the paper feed opening (2). 12 8. Malfunctions Paper jam Red LED on keyboard lights • Shredder reverses automatically and runs in this mode for a few seconds. • Pull out jam and remove excess paper. Caution! Do notattempt to force the jammed material through the machine by alternating the cutting system between forward and reverse. If paper jam cannot be removed • Hold down reverse button until paper can be pulled out of the cutting system. • Press green arrow button at least 4 sec • Continue shredding in smaller quantities so as not to jam the machine further. or • Continue shredding in smaller quantities...