Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: ABC Office Dateigröße: 75.77 kb Dateiname: Unterrichtssprache:

IMPORTANT – Only by clamping the paper pile securely is precise cut guaranteed. · Back gauge (#22) The back gauge is spindle-guided for easy and precise adjustment with the crank (#3). When squaring the paper pile avoid using excessive force against the back gauge otherwise the back gauge could be knocked fractionally out of the pre-set dimension and the guide piece of the back gauge is subjected to unnecessary wear. · Back gauge crank (#3) The crank is indirectly connected with the back gauge spindle. The crank is engaged by applying slight pressure toward the machine. The connection is released by pulling the crank towards the operator. If the crank is disengaged, the back gauge setting cannot be changed inadvertently. Turn to the right: back gauge moves towards the knife. Turn to the left: back gauge moves away from the knife. For precise setting of the measurement always move the back gauge from the back towards the knife. · Measuring scale Under the viewing window (#14) the measurement scale rotates in accordance with the back gauge movement. The exact measurement is to read beneath the indicator. To avoid inaccuracies, the scale has to be read vertically from above. · Side guide (#16) The side guide (#16) in combination with the back gauge allow a square alignment of paper pile to be cut. IMPORTANT – Please note that cutting accuracy depends on precise alignment of the paper against the side and back gauges and proper tightening of the paper clamp. · Thermal overload switch (#10) If the motor should be subjected to excessive strain (e.g. continuous cutting of strong cardboard with a dull knife), the power supply to the motor will be interrupted by the thermal overload switch (#10). The overload button will pop out a few mm. After a short cooling down period, the overload button can be reset again. Maintenance Knife change Precise cuts are only possible with a sharp knife. The knife should be changed as soon as the quality and the accuracy of a cut are not in accordance with the standards expected from this cutting machine. Knife life with normal paper is approximately 20 working hours; of course, this will vary with different types of paper. We recommend the purchase of a spare knife, so that a sharp knife is always available. This ensures that your machines remains operative even if the original knife has to be sent away for re- sharpening. Look for a professional re-sharpening service locally. Of course, your distributor knows one and can help you in this regard. The knife change must be executed by one person only. The cutting edge of the knife is extremely sharp. In order to avoid injuries, the knife has to be handled with the utmost care. Transportation of knife is only permitted in specially designed wooden cases, which are supplied with every spare knife ordered from your local distributor. The following description applies to model IDEAL 4810-11. Please note, that with models IDEAL 4810 and IDEAL 5210 the re-set button (#12) must be...

Herunterladen

Geben Sie zwei Ziffern: