Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Save These Instructions WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. ©Tacony, Inc., All rights reserved U.S. Patent No. 7,427,228 PSDMNI-MAN 7/2010 SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTIONS WARNING Read and understand all warnings and operating instructions before using any tools or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance, or modification of tools or equipment could result in serious injury and property damage. This product is NOT to be modified and/or used for any application other than for which it was designed. SAFETY GUIDELINES – DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER Indicates an imminently dangerous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a dangerous situation which, if not avoided could result in death or serious injury. CAUTION Indicates a potentially dangerous situation which, if not avoided, may result in personal injury. GENERAL SAFETY RULES WARNING Read and understand all instructions. Failure to follow all instructions listed below, may result in serious personal injury. SAVE THESE INSTRUCTIONS Work area safety A. Keep work area clean and well lit. Cluttered or dark areas invite accidents. B. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. C. Keep children and bystanders away while operating a power tool. Distractions may cause you to lose control. Electrical safety A. Power tools must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. B. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. C. Do not expose power tools to rain or wet conditions. D. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Personal safety A. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. B. Use safety equipment. Always wear eye protection. Safety equipment such as a dusk mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions will reduce personal injuries. C. Avoid accidental Starting. Ensure the switch is in the off-position before plugging in. D. Do not overreach. Keep proper footing and balance at all times. E. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Power Tool use and care A. Do not use the power tool if the switch does not turn it on and off. B. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. C. Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. D. Maintain the power tools. Check for damages and any condition that may affect the power tools operation. CARTON CONTENTS This tool comes with an instruction manual that includes a parts list. PSD101 – 5" Backer Pads (3) PSD103 – Adjustable dust skirt (1) BACKER PAD INSTALLATION Install the three, PSD101 – Backer Pads on the lower shafts of the Spindle Assemblies. Line up the screw on the back of the PSD101 – Backer Pads with the threaded holes in the lower shafts and turn counter-clockwise until finger tight. BACKER PAD SAVER INSTALLATION Attach the three, PSD102 – Backer Pad Savers on the, PSD102 – Backer Pads by aligning the pads together and pressing. SANDPAPER INSTALLATION Attach the necessary sandpaper needed for the application by aligning the paper onto the disc. DUST SKIRT INSTALLATION Once the above items are assembled, remove the Dust Skirt, PSD103 from the box and attach to the bottom of the deck plate ensuring the Dust Skirt you are attaching is level with the work surface for maximum vacuum suction. VACUUM ATTACHMENT Slide end of the vacuum hose you plan to use onto the vac port. Should be 1.25” in diameter for the vacuum hose. This should fit snuggly. Ensure the vacuum remains on and connected during operation of the machine. WARNING - AIRBORNE DUST CAN BE A SERIOUS FIRE HAZARD. ALWAYS FOLLOW THE MANUFACTURER’S INSTRUCTIONS FOR EMPTYING THE VACUUM CONTENTS. NEVER LEAVE MACHINE ATTACHED TO THE VACUUM UNATTENDED. OPERATION CAUTION Make certain the switch is in the “OFF” position before connecting the tool to the power source to avoid unintentional starting. WARNING Make sure to wear eye and ear protection whe...