Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Porter-Cable Dateigröße: 508.67 kb Dateiname: Unterrichtssprache:

A guard protects operator from broken wheel fragments. 2. Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury. 3. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 4. Always disconnect the sander cord plug from the power circuit before changing abrasive sheets. 5. Do not run tool with back-up pad removed. Resulting vibration could cause loss of control. 6. Use proper safety equipment. Wear safety goggles to protect your eyes and wear a protective mask to minimize breathing in the fine dust created while sanding. 7. Sanding of lead-based paint is not recommended. Lead-based paint should only be removed by a professional. 8. Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request, and follow, any safety information available from your material supplier. Improper operation or maintenance of this product could result in serious injury and property damage. Read and understand all warnings and operating instructions before using this tool. When using power tools, basic safety precautions should always be followed to reduce the risk of personal injury. For additional information visit our website Additional Information regarding the safe and proper operation of power tools (i.e. a safety video) is available from the Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851 (Additional Information is also available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201, the American National Standards Institute ANSI 01.1Safety Requirements for Woodworking Machines, and the U.S. Department of Labor regulations. There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you. Technical Service Manager Porter-Cable Corporation 4825 Highway 45 North Jackson, TN 38305 4 ADDITIONAL SAFETY RULES FOR PAINT REMOVAL Extreme care should be taken when removing paint. The peelings, residue, and vapors of paint may contain lead, which is poisonous. Exposure to even low levels of lead can cause irreversible brain and nervous system damage; young and unborn children are particularly vulnerable. Before beginning any paint removal process you should determine whether the paint you are removing contains lead. This can be done by your local health department or by a professional who uses a paint analyzer to check for lead. LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL. Persons removing paint should follow these guidelines: 1. KEEP THE WORK AREA WELL VENTILATED. Open the windows and put an exhaust fan in one of them. Be sure the fan is moving air from inside to outside. 2. REMOVE OR COVER any carpets, rugs, furniture, clothing, cooking utensils and air ducts. 3. PLACE DROP CLOTHS in the work area to catch any paint chips or peelings. Wear protective clothing such as extra work shirts, overalls and hats. 4. WORK IN ONE ROOM AT A TIME. Furnishings should be removed or placed in the center of the room and covered. Work areas should be sealed off from the rest of the dwelling by sealing doorways with drop cloths. 5. CHILDREN, PREGNANT OR POTENTIALLY PREGNANT women and nursing mothers should not be present in the work area until the work is done and all cleanup is complete. 6. WEAR A DUST RESPIRATOR or a dual filter (dust and fume) respirator mask which has been approved by the Occupational Safety and Health Administration (OSHA), the National Institute of Safety and Health (NIOSH), or the United States Bureau of Mines. These masks and replaceable filters are readily available at major hardware stores. Be sure the mask fits. Beards and facial hair may keep the masks from sealing properly. Change filters often. DISPOSABLE PAPER MASKS ARE NOT ADEQUATE. 7. KEEP FOOD AND DRINK out of the work area. Wash hands, arms, and face and rinse mouth before eating or drinking. Do not smoke or chew gum or tobacco in the work area. 8. CLEAN UP ALL REMOVED PAINT and dust by wet mopping the floors. Use a wet cloth to clean all walls, sills and any other surfaces where paint or dust is clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phosphate detergent or trisodium (TSP) to wash and mop areas. 9. AT THE END OF EACH WORK SESSION put the paint chips and debris in a double plastic bag, close it with tape or twist ties and dispose of properly. 10. REMOVE PROTECTIVE CLOTHING and work shoes in the work ar...

Herunterladen

Geben Sie zwei Ziffern: