Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 19. Do not operate if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate tool. 20. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. 21. WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.) Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. VIBRATION HAZARD This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: 1. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. 2. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury. 3. Wear suitable gloves to reduce the vibration effects on the user. 4. Use tools with the lowest vibration when there is a choice between different processes. Rev 07i 5. Include vibration-free periods each day of work. 6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. 7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. UNPACKING When unpacking, check to make sure all parts listed on Page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. AIR CONNECTION Note: Air Compressor is not supplied. 1. Acquire a Union fitting (not supplied) and screw into the Air Inlet fitting. Tighten with the wrench. 2. Attach a quick-coupler (not supplied) to the Union fitting if desired. This allows quick exchange of the Air Hose to other air tools. 3. Connect the Air Hose to the Air Inlet Coupling. Warning: Follow all air compressor warnings before using tool. This air tool requires lubrication during operation. For best results, it is recommended to have an oiler and water filter in line with the air supply as shown on Page 6. This will extend the life of the tool. Rev 07i AIR CONNECTION Note: Air Compressor is not supplied. 1. Acquire a Union fitting (not supplied) and screw into the Air Inlet fitting. Tighten with the wrench. 2. Attach a quick-coupler (not supplied) to the Union fitting if desired. This allows quick exchange of the Air Hose to other air tools. 3. Connect the Air Hose to the Air Inlet Coupling. Warning: Follow all air compressor warnings before using tool. This air tool requires lubrication during operation. For best results, it is recommended to have an oiler and water filter in line with the air supply as shown on Page 5. This will extend the life of the tool. AIR COMPRESSOR ASSEMBLY DIAGRAM OPERATION Warning: Before installing the attachment, make sure Grinder is not attached to the air supply and make sure no built up air pressure remains in the Air Die Grinder. 1. Select the desired grinding attachment. 2. As shown in the diagram on Page 7, use the Wrenches (28) to hold the Retainer [24] while removing the Collet Nut (27). 3. Insert the shaft of the grinding attachment into the Collet (26). 4. Reassemble the Collet and Collet Nut. Tighten with both Wrenches. 5. Set the Air Compressor’s pressure regulator to 90 PSI. 6. Connect the Die Grinder to the Air Compressor’s hose. 7. Secure the stock you will be grinding. Warning: Do not hold the stock with your hand. 8. Wear safety glasses or a full face mask. 9. Grip the Die Grinder firmly with your hand, then squeeze the Safety Throttle Lever (13) to turn it on. The speed of the Die Grinder depends on how far down you press the Lever. Warning: Allow the grinding attachment to do the work. Do not use excessive force to press the attachment into the stock surface that is being ground. If the Die Grinder stalls while being operated, immediat...