Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Harbor Freight Tools
Dateigröße: 516.06 kb
Dateiname: 52847.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. SPECIFICATIONS ITEM DESCRIPTION 90 PSI 25,000 RPM 1/4” NPT 1/4” 11 mm Collet Wrench (Qty: 1) 17 mm Collet Wrench (Qty: 1) Max. Air Pressure Air Speed Fitting Size Collet Sizes Accessories SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, operating and maintenance procedures, parts lists and diagrams. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. SAFETY WARNINGS AND PRECAUTIONS 1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite injuries. 2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle the Air Die Grinder. 3. STORE IDLE EQUIPMENT. When not in use, the Air Die Grinder should be stored in a dry location to inhibit rust. Always lock up the Air Die Grinder and keep out of reach of children. 4. DO NOT USE THE AIR DIE GRINDER IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product. 5. USE EYE AND HEARING PROTECTION. Wear ANSI approved safety impact eye glasses and ANSI approved hearing protection when working with the Air Die Grinder. ANSI approved safety impact eye glasses and hearing protection are available from Harbor Freight Tools. 6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when working with this product. Do not wear loose clothing or jewelry as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long sleeve shirt, roll the sleeves up above the elbows. 7. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera. 8. STAY ALERT. Watch what you are doing at all times. Use common sense. Do not use the Air Die Grinder when you are tired or distracted from the job at hand. SKU 52847 PAGE 2 9. CHECK FOR DAMAGED PARTS. Before using the Air Die Grinder, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of the Air Die Grinder. Replace or repair dam- aged or worn parts immediately. 10. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replace- ment parts. Only use tools and accessories intended for use with this Air Die Grinder. Approved tools and accessories are available from Harbor Freight Tools. 11. MAINTAIN THESE PRODUCTS WITH CARE. Keep this tool and accessories clean and dry for better and safer performance. 12. MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician. 13. USE THE RIGHT PRODUCTS FOR THE RIGHT JOB. There are certain applications for which this Air Die Grinder was designed. Do not use a small tool or accessory to do the work of a larger industrial tool or accessory. Do not use this Air Die Grinder for a purpose for which it was not intended. SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1 USE CLEAN, DRY, REGULATED COMPRESSED AIR AT 90 PSI. Do not exceed the recommended 90 PSI. Never use oxygen, carbon dioxide, combustible gases or any other bottled gas as a power source for this tool. 2. WHEN CONNECTING TO THE AIR SUPPLY: A. If an automatic oiler is not used, add two drops of air tool oil into the air inlet of the Air Die Grinder. (See Figure A.) B. Turn on the compressor and set the regulator to the recommended 90 PSI for this tool. 3. ALWAYS DISCONNECT TOOL FROM ITS AIR SUPPLY AND RELEASE ALL BUILT UP AIR PRESSURE BEFORE PERFORMING ANY SERVICES OR MAINTENANCE such as cleaning or changing accessories on the Air Die Grinder, leaving the work area, moving the Air Die Grinder from one location to another, handing the Air Die Grinder to another person, etcetera. (See Figure A, page 4) 4. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.) REV 02/06 SKU 52847 PAGE 3 FIGURE A UNPACKING When unpacking, check to make sure all parts shown o...