Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Grizzly Dateigröße: 2.95 mb Dateiname: 8dcb7876-515c-4f44-9adc-697774b375b3.pdf Unterrichtssprache:

Make sure switch is in OFF position before reconnecting. 15. MAINTAIN MACHINERY WITH CARE. Keep blades sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 16. MAKE SURE GUARDS ARE IN PLACE AND WORK CORRECTLY BEFORE USING MACHINERY. 17. REMOVE ADJUSTING KEYS AND WRENCHES. Make a habit of checking for keys and adjusting wrenches before turning machinery ON. 18. CHECK FOR DAMAGED PARTS BEFORE USING MACHINERY. Check for binding and alignment of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect machine operation. Repair or replace damaged parts. 19. USE RECOMMENDED ACCESSORIES. Refer to the instruction manual for recommended accessories. The use of improper accessories may cause risk of injury. 20. DO NOT FORCE MACHINERY. Work at the speed for which the machine or accessory was designed. 21. SECURE WORKPIECE. Use clamps or a vise to hold the workpiece when practical. A secured workpiece protects your hands and frees both hands to operate the machine. 22. DO NOT OVERREACH. Keep proper footing and balance at all times. 23. MANY MACHINES WILL EJECT THE WORKPIECETOWARDTHEOPERATOR. Know and avoid conditions that cause the workpiece to "kickback." 24. ALWAYS LOCK MOBILE BASES (IF USED) BEFORE OPERATING MACHINERY. 25. BE AWARE THAT CERTAIN DUST MAY CAUSE AN ALLERGIC REACTION in people and animals, especially when exposed to fine dust. Make sure you know what type of dust you will be exposed to and always wear an approved respirator. -5 G0472/G0473/G0476 Sandblasters Additional Safety Instructions for Sandblasters 1. CORRECT ABRASIVES. Never use wet 8. MAINTAINING MACHINE. Check cabinet abrasives in this sandblaster, it is designed for any leaks, and reseal immediately. for dry abrasives only. 9. SAFE SAND BLASTING. Do not use sys2. PROTECTING LUNGS. Make sure that tem over the rated PSI. you always use a respirator when using or cleaning the sandblaster. 10. CORRECT LIGHTING. Do not use a light that uses over 60 watts. 3. LEAVING THE AREA. Always disconnect air supply when leaving the sandblaster. 11. LOADING & UNLOADING. Disconnect the air supply before loading or unloading the 4. PROTECTING EYES. Make sure that you workpiece from the sandblaster cabinet. always use safety glasses when using or cleaning the sandblaster. 12. SAFE MAINTENANCE. Disconnect air supply and electrical before doing mainte 5. PROTECTING ENVIRONMENT. Always nance. close and latch shut the sandblaster doors when not in use. 13. SAFE SANDBLASTING. Always secure the door(s) before beginning sandblasting 6. WORK AREA SAFETY. Clean dust collec-operations. tor and filters often, and repair any suction hose leaks immediately. 7. MAINTAINING COMPONENTS. Replace nozzles, hoses, lenses, and gloves when they become worn. No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious per- sonal injury, damage to equipment, or poor work results. Like all machinery there is potential danger when operating this machine. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to lessen the pos- sibility of operator injury. If normal safety precautions are overlooked or ignored, seri- ous personal injury may occur. -6 G0472/G0473/G0476 Sandblasters G0472/G0473/G0476 Sandblasters -7- The Model G0472/G0473/G0476 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. This machine presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and operations before starting the machine! Set Up Safety Unpacking SECTION 2: SET UP The following items are needed to complete the set up process, but are not included with your machine: Description Qty • Phillips Screwdriver #2 ............................... 1 • Standard Screwdriver #2 ............................ 1 • Wrench 19mm ............................................ 1 • Wrench 14mm ............................................ 1 • Wrench 10mm ............................................ 1 • Wrench 7mm .............................................. 1 Items Needed for Set Up 4. Install the lamp and wiring with the M4-0.7 x G0472 Assembly 10 screws, washers, and nuts. Use the zip- ties to lock the lamp to the two lamp supports (Figure 4). To assemble the sandblaster: 1. Install the four legs onto the stand frame with 12 M6-1x20 screws and nuts (Figure 1). 5. Insert the air supply hose through the cabinet grommet, an...

Herunterladen

Geben Sie zwei Ziffern: