Login:
Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Anleitung Wilton, modell 4103

Hersteller: Wilton
Dateigröße: 1.17 mb
Dateiname: 8abf40af-e27f-4314-c5da-2c997da3ad43.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


5507796 Revision C2 09/04 Copyright © WMH Tool Group Table of Contents Cover Page .........................................................................................................................................1 General Specifications.........................................................................................................................4 Operating Precautions .........................................................................................................................5 Setup and Operation............................................................................................................................7 Maintenance ......................................................................................................................................10 Wiring Diagrams ................................................................................................................................12 Replacement Parts ............................................................................................................................13 Troubleshooting .................................................................................................................................13 Accessories .......................................................................................................................................17 General Specifications The Wilton Square Wheel Belt Grinder, Models 4103, 4106 and 4126AC, are designed for grinding, deburring, chamfering, and internal/external grinding of small and large parts. The Square Wheel Belt Grinder can be used to polish or buff finished parts and grind small internal radii using available accessories. Accessory changeover is quick and easy. Belt tension and tracking are easily adjustable. The Square Wheel Belt Grinder is available in either single speed (Models 4103 and 4106) or variable speed model (Model 4126AC). The variable speed model is controlled by an inverter that provides belt speeds ranging from 0 to 6000 SFPM. Specifications Model 4103 Model 4106 Model 4126AC Belt Width & Length 2 x 72 Inches 2 x 72 Inches 2 x 72 inches Belt Speed 4600 SFPM 4600 SFPM 0 - 6000 SFPM Motor 1 HP, Single Phase, 1750 rpm 2 HP, Three Phase, 1750 rpm 1 HP, 1,750 rpm Contact Wheel Diameters 1-1/2, 3, & 8 inches 1-1/2, 3, & 8 inches 1-1/2, 3, & 8 inches Weight 115-125 pounds 120 pounds 120 pounds - Misuse of this machine can cause serious injury. - For safety, machine must be set up, used and serviced properly. -Read, understand and follow instructions in the operator’s and parts manual which was shipped with your machine. When setting up machine: -Always avoid using machine in damp or poorly lighted work areas. -Always be sure machine is securely anchored to the floor. -Always keep machine guards in place. -Always put start switch in OFF position before plugging in machine. When using machine: -Never operate with machine guards missing. -Always wear safety glasses with side shields (See ANSI Z87.1) - Never wear loose clothing or jewelry. -Never overreach . you may slip and fall into the machine. -Never leave machine running while you are away from it. -Always shut off the machine when not in use. When servicing machine: -Always unplug machine from electrical power while servicing. -Always follow instructions in operators and parts manual when changing accessory tools or parts. -Never modify the machine without consulting Wilton Corporation. You — the stationary power tool user— hold the key to safety. Read and follow these simple rules for best results and full benefits from your machine. Used properly, Wilton’s machinery is among the best in design and safety. However, any machine used improperly can be rendered inefficient and unsafe. It is absolutely mandatory that those who use our products be properly trained in how to use them correctly. They should read and understand the Operators and Parts Manual as well as all labels affixed to the machine. Failure in following all of these warnings can cause serious injuries. Machinery general safety warnings 1. Always wear protective eye wear when operating machinery. Eye wear shall be impact resistant, protective safety glasses with side shields which comply with ANSI Z87.1 specifications. Use of eye wear which does not comply with ANSI Z87.1 specifications could result in severe injury from breakage of eye protection. 2. Wear proper apparel. No loose clothing or jewelry which can get caught in moving parts. Rubber soled footwear is recommended for best footing. 3. Do not overreach. Failure to maintain proper working position can cause you to fall into the machine or cause your clothing to get caught pulling you into the machine. 4. Keep guards in place and in proper working order. Do not operate the machine with guards removed. 5. Avoid dangerous working environments. Do not use stationary machine tools in wet or damp locations. Keep work areas clean and well lit. 6. Avoid acc...

Dieses Handbuch ist für folgende Modelle:
Schleifmaschinen - 4106 (1.17 mb)
Schleifmaschinen - 4126AC (1.17 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien