Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Written by: C. Vallee Checked by: C. Franoux Approved by: A. Badino Reviewed by: R. Lympany FFBM PN 42L2445 1 of 10 EC F52322 EC F12701A EC F70078 09 Oct 1998 14 DEC 1998 22 APR 1999 O Copyright IBM Corp. 1998, 1999 EA. Installation Instructions FFBM PN 42L2445 2 of 10 EC F52322 EC F12701A EC F70078 09 Oct 1998 14 DEC 1998 22 APR 1999 EA. Installation Instructions Before Installation (Steps 1-8) 1.0 Machines Affected 3746 Model 900 with service processor and network node processor type: 6275-56U, 6275-83U, 7585-P02, or 3172-P90. This feature should only be applied on the machine serial number for which it is specified. 2.0 Related BMs and ECs 2.1 Prerequisites (Must be installed prior to this installation) Feature Title 5053 Service Processor type 6275-56U or 6275-83U or 5052 Service Processor type 7585-P02 or 5021 Service Processor type 3172-P90 5423 Network Node Processor-A type 6275-56U or 6275-83U or 5122 Network Node Processor-A type 7585-P02 or 5022 Network Node Processor-A type 3172-P90 EC Title F12720 Licensed Internal Code (Minimum level) Checkpoint: Check that the APPN EC Level is F12721.000 or higher. Note: Refer to the SPIMor the Service User's Guide shipped with the service processor, verify that the code is at EC F12720 or above. Use the procedure: Displaying the EC Level of the Code installed on the hard disk. If the EC of the code installed is prior to F12720, use the installation instructions to install the new level of code shipped. FFBM PN 42L2445 3 of 10 EC F52322 09 Oct 1998 EC F12701A 14 DEC 1998 EC F70078 22 APR 1999 EA. Installation Instructions 2.2 Concurrent ECs (Must be installed together) None. 2.3 Companion ECs (May be installed together) None. 3.0 BMs to be Installed Feature B/M Title 26L0451 Network Node Processor B (NNP-B) Feature Code 5423 4.0 Preparation 1. Familiarize yourself with the purpose and details of the installation instruction before negotiating machine time with the customer. 2. Check all items listed on the BM(s) to determine that all parts have been received. Refer to chapter 1 in the Network Node Processor Installation and Maintenance (Based on 6275), SY33-2126. 3. The set up of the NNP-B has no impact on customer operations. 4. Obtain from the customer the Parameter worksheet. 5.0 Programming None. 6.0 Purpose and Description 6.1 Purpose To increase the reliability of the 3746-9X0 by adding a backup NNP. 3746 PN 42L2445 EC F52322 EC F12701A EC F70078 FFBM 4 of 10 09 Oct 1998 14 DEC 1998 22 APR 1999 EA. Installation Instructions 6.2 Description The installation of the NNP-B is divided into two main steps: 1. Installing the 6275-56U or the 6275-83U system unit 2. Loading the code on the NNP-B. Note: These steps are documented in the Network Node Processor Installation and Maintenance (Based on 6275), SY33-2126. FFBM PN 42L2445 5 of 10 EC F52322 EC F12701A EC F70078 09 Oct 1998 14 DEC 1998 22 APR 1999 EA. Installation Instructions 7.0 Installation Time FFBM Machine Hrs. System Hrs. Nbr of CEs 26L0451 0.2 0.0 1 Note: To reduce the MES installation time it is recommended that you load the Network Node Processor Code on the Service Processor and install the system unit at the same time. No impact on 3745 customer operations. 8.0 Tools/Material Required None. Installation (Steps 9-12) 9.0 Safety Review the Safety Notices and the Safety Inspection Procedures located at the beginning of the IBM 3745 Communication Controller All Models, IBM 3746 Expansion Unit Model 900, IBM 3746 Nways Multiprotocol Controller Model 950 Safety Information, GA33-0400. 10.0 Details of Installation. 10.1 Installing and Connecting the NNP Note: For any unexpected message or error concerning the NNP-B, go to Chapter 3. Network Node Processor Problem Determination of the Network Node Processor Installation and Maintenance (Based on 6275), SY33-2126. 1. Using the Network Node Processor Installation and Maintenance (Based on 6275), SY33-2126., go to chapter 1 and install the NNP following the instructions to install a NNP-B. When completed go to next step. 2. Ask the customer for a maintenance window on 3746-900 with traffic deactivated. FFBM PN 42L2445 6 of 10 EC F52322 09 Oct 1998 EC F12701A 14 DEC 1998 EC F70078 22 APR 1999 EA. Installation Instructions 3. Shutdown and restart the Service Processor and re-iml the 3746-9x0 10.2 Enabling the NNP Back-up Function Important It's a customer task, but ask the customer if he wants you to perform this task. 1. On the 3746-9X0 main menu, Click on Network Node Processor Management. 2. Double click on Manage Control Point on NNPs. 3. Click on Enable the CP/NNP back-up. 4. Click on Close to exit from the function. Note: For details refer to chapter Working with the NNP Functions on the 3746-950 User's Guide, SA33-0356, or the 3745-17A to 61A and 3746-900 Basic Operation Guide, SA33-0177. FFBM PN 42L2445 7 of 10 EC F52322 EC F12701A EC F70078 09 Oct 1998 14 DEC 1998 22 APR 1999 EA. Installation Instructions 10.3 Log Off the MOSS-E 1. On the 3746-9x0 Me...