Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Tools needed for installation
C. Remove the flat head screws (M3xL8) (A) with a Philips
screwdriver, pull open the display's central decoration
covers forward and then back.
Note: Keep the bottom decoration cover from
falling off after loosening the screw.
!
A
A
1. Wrench 21mm
2. Philips screwdriver
Installation steps
Flat head screw
(M3xL8)x18
1.Install panel display to a cart
!
A. Remove the flat head screws (M3xL8) (A) with a
D. Note: Turn the cart 90° to the side, place it on a flat
90°
Philips screwdriver, pull open the display frame
surface. Please pad the surface with soft pad
covers forward and then back.
when turning the cart to prevent it from being
scratched.
Note: Keep the decoration cover from falling off after
Remove the flat head screw (M4xL10) (B) with a
loosening the screw.
Philips screwdriver and pull open the external cover
at the top of display forward and then back.
A
B
Flat head screw
(M3xL8)x12
Flat head screw
(M4xL10)x6
B
A
B. Remove the flat head screws (M3xL8) (A) with a Philips
screwdriver, pull open the display's central decoration
E. Tear off tapes and remove display frame (C).
covers forward and then back.
Note: Keep the display frame (C) from falling off after
!
Note: Keep the central decoration cover from falling
the tape is removed.
A
off after loosening the screw.
C
A
Flat head screw
(M3xL8)x12
...Dieses Handbuch ist für folgende Modelle:
Netzwerk - DH550Z (2.91 mb)