Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Actiontec electronic Dateigröße: 682.07 kb Dateiname: USB-4761man.pdf Unterrichtssprache:

To troubleshoot the Device Drivers error, you can pass the error code to DRV_GetErrorMessage function to return the error message. Alternatively, you can refer to the Device Drivers Error Codes Appendix in the Device Drivers Manual for a detailed listing of Error Codes, Error IDs and the Error Messages. USB-4761 User Manual 8 CHAPTER 2 Installation This chapter has a package item checklist, proper instructions about unpacking and step-by-step procedures for both driver and USB installation.. Sections include: • Unpacking • Driver Installation • Hardware Installation • Device Setup & Configuration • Device Testing • Hardware Uninstallation Chapter 2 Installation 2.1 Unpacking After receiving your USB-4761 package, please inspect its contents first. The package should contain the following items: • USB-4761 Module • Shielded USB 2.0 Cable (1.8 m) • Companion CD-ROM (DLL driver included) • User Manual The USB-4761 Module harbors certain electronic components vulnerable to electrostatic discharge (ESD). ESD could easily damage the integrated circuits and certain components if preventive measures are not carefully paid attention to. Before removing the module from the antistatic plastic bag, you should take following precautions to ward off possible ESD damage: • Touch the metal part of your computer chassis with your hand to discharge static electricity accumulated on your body. One can also use a grounding strap. • Make contact between the antistatic bag and ground before opening the bag. After taking out the module, you should first: Inspect the module for any possible signs of external damage (loose or damaged components, etc.). If the module is visibly damaged, please notify our service department or our local sales representative immediately. Avoid using a damaged module with your system. • Avoid physical contact with materials that could hold static electricity such as plastic, vinyl and Styrofoam. USB-4761 User Manual 10 2.2 Driver Installation We recommend you install the software driver before you install the USB-4761 module into your system, since this will guarantee a smooth installation process. The 32-bit DLL driver Setup program for the USB-4761 module is included on the companion CD-ROM that is shipped with your module package. Please follow the steps below to install the driver software: Step 1: Insert the companion CD-ROM into your CD-ROM drive. Step 2: The Setup program will be launched automatically if you have the auto-play function enabled on your system. When the Setup Program is launched, you’ll see the following Setup Screen. Note: If the auto-play function is not enabled on your computer, use Windows Explorer or Windows Run command to execute Setup.exe on the companion CD-ROM. Figure 2.1: Advantech Automation Software Setup 11 Chapter 2 Step3: Click Continue, and select the Installation option Step4: Select the specific device and then just follow the installation instructions step by step to complete your device driver installation and setup. For further information on driver-related issues, an online version of the Device Drivers Manual is available by accessing the following path: Start\Programs\Advantech Automation \Advantech Device Manager\Device Driver’s Manual 2.3 Hardware Installation Note: Make sure you have installed the software driver before you install the module (please refer to Section 2.2 Driver Installation) After the DLL driver installation is completed, you can now go on to install the USB-4761 module in any USB port that supports the USB 2.0 standard, on your computer. It is suggested that you refer to the computer’s user manual or related documentation if you have any doubts. Please follow the steps below to install the module on your system. Step 1: Touch the metal part on the surface of your computer to neutralize the static electricity that might be in your body. Step 2: Plug your USB module into the selected USB port. Hold the module only by its edges Plug the module firmly into place. Use of excessive force must be avoided; otherwise the module might get damaged. Note: In case you installed the module without installing the DLL driver first, Windows 2000/XP will recognize your module as an “unknown device” after reboot, and will prompt you to provide necessary driver. You should ignore the prompting messages (just click the Cancel button) and set up the driver according to the steps described in Section 2.2 Driver Installation. USB-4761 User Manual 12 Figure 2.2: Device Name on the Device Manager Note: If your module is properly installed, you should see the device name of your module listed on the Device Manager tab. If you see your device name listed, but marked with an exclamation sign “!” (Fig. 2-4), it means your module has not been correctly installed. In this case, remove the module from Device Manager by selecting its device name and press the Remove button. Then go through the driver installation process again. 13 Chapter 2 Figure 2.3: The (!) Indicate...

Herunterladen

Geben Sie zwei Ziffern: