Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
This easy- to-set-up, easy-to-use product is perfect for the home computer user. If you want to dramatically accelerate your Internet connection and take your computing to the next level, the Actiontec USB Home DSL Modem is one of the keys to your success. Package Contents • Actiontec USB Home DSL Modem • Power adapter • DSL cable • USB cable • Phone filters • Installation CD (includes user manual) • Quick start guide • Warranty and registration card 1 Actiontec USB Home DSL Modem User Guide Minimum System Requirements • Active DSL service • Computer with a USB connection • Microsoft Windows 98,Windows 98 Second Edition (SE), Windows Millennium Edition (Me), Windows 2000,Windows XP • Internet Explorer 4.0 or higher (5.x recommended) or Netscape Navigator 4.0 or higher (4.7 recommended) Technical Support Actiontec Electronics prides itself on making durable, high-quality, high-performance products. If you need assistance, the Actiontec Technical Support Department is available 24 hours a day, every day, to provide professional support. Actiontec Electronics, Inc. 760 N. Mary Avenue Sunnyvale, CA 94085 Technical Support Phone: 888.436.0657 E-mail: techsupp@actiontec.com Internet: 2 Chapter 1 Introduction Modem Features The Modem features two LEDs (lights) on its front panel, and series of ports on its rear panel. We recommend the user become familiar with these features before installing or setting up the Modem. Front Panel There are two LEDs (light emitting diodes, or lights) on the front panel of the Modem, as shown in the figure, below. PW LK PWR LED The PWR (Power) LED glows green when power is supplied to the Modem. When it flashes, the Modem is going through its initialization process. LK LED The LK (Link) LED glows green when the DSL connection is active. When it blinks, data is traveling across the connection 3 Actiontec USB Home DSL Modem User Guide Rear Panel The Modem has four ports on its rear panel: Line, Phone, USB, and Power. Power Adapter (from Line Port (from Phone Port (from USB Port (from Power Port to DSL Outlet) to Telephone) to Computer) to Power Outlet) USB Power Line Phone USB Cable DSL Cable Phone Cable Line Port The Line port is used to connect the Modem to the DSL outlet. Phone Port The Phone port is used to connect a telephone to the Modem. USB Port The USB port is used to connect the Modem to a computer. Power Port The Power port is used to connect the Modem’s power adapter to a wall outlet. 4 Setting Up 2 the Modem Setting up the Modem involves two basic steps: connecting a computer to the Modem, and configuring the Modem to activate the DSL connection and load the software drivers. Connecting a Computer to the Modem The instructions in this section parallel the steps contained in the Actiontec Installation Buddy™,which provides a visual guide to connecting the Modem to a computer and installing phone filters. It is recommended the user run the Installation Buddy first, before attempting any other procedures. To connect the Modem to a computer: 1. Insert the Actiontec Installation Buddy CD-ROM in the CD-ROM drive of the computer. The Installation Buddy will start automatically. Wait until the following screen appears in your Internet browser window, read the onscreen instructions, then click Next. 5 Actiontec USB Home DSL Modem User Manual 2. The next window appears. Get the Modem, Power Cord, USB Cable, DSL Cable, and Clear Bag from the Quick Start Kit, then click Next. 3. The next window appears. Place the Modem upright in its stand, then click Next. 4. The next window appears. Take the gray Power Cord and plug the smaller end into the Power Port on the rear panel of the Modem. Click Next. 6 Chapter 2 Setting Up the Modem 5. The next window appears. Plug the larger end of the Power Cord into a Power Outlet in a wall, then click Next. 6. When the next window appears, confim the PW (Power) Light on the front of the Modem glows solid green, orange,or red.Click Next. 7. Another window appears. Plug one end of the gray DSL Cable into the Line Port on the rear panel of the Modem, then click Next. 7 Actiontec USB Home DSL Modem User Manual 8. When the next window appears, plug the other end of the DSL Cable into the Wall Jack closest to your computer, then click Next. 9. The next window appears. Plug the square end of the beige USB Cable into the USB Port on the rear panel of the Modem, then click Next. 10. As shown in the next window, leave the other end of the USB cable unplugged. Click Next. 8 Chapter 2 Setting Up the Modem 11. When the next window appears, read the instructions, then get the Phone Filters from the Clear Bag.Click Next. 12. When the next window appears, unplug all phone cords from their respective phone jacks.Click Next. Note: Do not remove the DSL Cable from the phone jack near . the computer. 9 Actiontec USB Home DSL Modem User Manual 13. The following window appears. Plug a phone filter in every phone jack, then click Next. Note: Do not...