Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Configure the DAP-1320 Using a Web Browser
Troubleshooting
You may log into the web-based configuration utility on the DAP-1320
Open a web browser (e.g., Internet Explorer, Firefox, Safari, or
The home page will display your current status. A green check
to perform the following tasks:
3
Why can’t I connect to my wireless router or my wireless
5. Click or press Save.
Chrome) and enter http://dlinkap.local./. You may also enter the
5 mark represents a successful connection to your wireless router connection drops?
Note: If you have changed the Wi-Fi Network name, the device you are
IP address* of the DAP-1320. Windows XP users can enter
or Access Point (AP).
1. Verify that the DAP-1320 is within range of your wireless router. Try
currently using to connect to the DAP-1320 will drop. You will need to
• Run the setup wizard
http://dlinkap.
plugging it into a location closer to the router and verify the LED is
open your wireless utility and connect to the DAP-1320 using the new
• Upgrade firmware
solid green.
network name and password.
• Change wireless and network settings
2. If you initially connected the DAP-1320 to your router and it no longer
What if I forgot my DAP-1320 password?
connects, log in to your router and change the wireless security to
1. If you forgot your password or want to reset the DAP-1320 back to
WPA2 only (do not use auto detect).
the factory default settings, press and hold the reset button using
1 Plug the DAP-1320 in an available outlet near your router. You
may move it to a more suitable location after configuration.
3. Try setting your wireless router to a specific channel (1, 6, or 11)
a paper clip and release after 10 seconds.
instead of “auto”.
Warning: This process will erase all your settings.
4. Note that when repeating a wireless signal from a router or access
2. You may repeat the WPS process on the other side of this QIG or
Once you connect, the log in page will appear. Enter your
point, devices connected to the repeater will not get the same speed/
log in and run the Setup Wizard. Follow the steps under Configure
4
Open the wireless utility on your wireless device or computer.
2
password and click Log in. By default the password is blank.
throughput as when connected directly to the router.
the DAP-1320.
Select the Wi-Fi Network name (from the Wi-Fi Companion
Card) and enter the password.
Note: If this is the first time logging in the DAP-1320, you will be
If the check mark is red, you may connect to your wireless router
How do I change the wireless settings on the DAP-1320?
Documentation available at http://www.dlink.com/DAP-1320.
directed to the setup wizard automatically.
or AP by clicking on the Uplink Router icon.
1. Open a web browser (e.g., Internet Explorer, Firefox, Safari, or Chrome)
Technical Support
and go to http://dlinkap.local./ (or http://dlinkap on Windows XP).
Click the Settings tab to edit your wireless and network settings.
Click the Management tab to change the DAP-1320 login
2. At the login screen, click or press the Log in button (no password by
Having trouble installing your new product? D-Link’s website
Wi-Fi Name(SSID):
password, update firmware, or view statistics.
default).
contains the latest user documentation and software updates
dlink-2c19
Wi-Fi Password:
for D-Link products. U.S. and Canadian customers can contact
gccnu80856
3. Go to Settings > Extended Wi-Fi Settings.
Web browser link:
Visit http://www.dlink.com/DAP-1320 to download the user
D-Link Technical Support through our website.
http://dlinkap2c19.local.
4. Enter a new wireless name (SSID) and password.
manual for more information.
United States
Canada
http://support.dlink.com
http://support.dlink.ca
Copyright ©2015 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link
logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other
countries. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark
of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless signal
rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials
and construction, and network overhead, lower actual data throughput rate. Environmental factors
will adversely affect wireless signal range. Product specifications, size and shape are subject to change
* The default IP address is 192.168.0.50. Once the DAP-1320 connects to your router, it
without notice, and actual product appearance may differ from that depicted on the packaging. Visit
www.dlink.com for more details.
will get assigned a new IP address based on your router/network’s DHCP settings. You
will need to log in to your router and view the DHCP table to see what IP address was
assigned to the DAP-1320. The MAC address is printed on the label on the DAP-1320.
Version 2.01(NA)_95x150 | January 1, 2015
290726001320B14
...