Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
ENGLISH
Quick Install Guide
Device Placement
Installation
To get the best wireless coverage, place your range extender in an open area away
Step 1 - Connect the DAP-1360 to your computer using the supplied Ethernet cable.
Wireless N Range Extender
from your computer, monitor, and speakers. Try to position the device so that the
Once you configure the device, you can place it into your network.
signal passes through drywal or open doorways. Materials and objects such as glass,
steel, metal, wal s with insulation, water (fish tanks), mirrors, file cabinets, brick, and
Note: To login to your DAP-1360, you must statical y assign an IP address (192.168.0.x
concrete wil degrade your wireless signal.
where x is between 2 and 254, and not 50) on your computer. Refer to the Networking
Basics section in the user manual located on the supplied CD for more information.
Wireless Modes
Access Point Mode - The DAP-1360 acts as a central connection point for any
Step 2 - To access the configuration utility, open a web browser such as Internet
wireless client that has an 802.11n or backward-compatible 802.11g wireless
Explorer and enter dlinkap or 192.168.0.50 in the address field.
network interface and is within range of the AP. Multiple clients can connect to
the AP at the same time.
Step 3 - Type Admin and then enter your password. Leave the password blank
by default.
Wireless Client Mode - The DAP-1360 acts as a wireless network adapter for your
Ethernet enabled device (such as a game console or a TV set-top box) and will
Step 4 - Once you login, click Launch Wireless Setup Wizard to configure your
connect wirelessly to an existing wireless router or access point.
DAP-1360.
Thank you for purchasing the DAP-1360 Wireless N Range Extender. Fol ow the easy
Repeater Mode - The DAP-1360 increases the range of your wireless network by
steps in this guide to properly set up your device. Please verify that al the package
extending the wireless coverage of another AP or wireless router.
Step 5 - Enter a name for your device. This is helpful if you have multiple DAP-1360s
contents listed below are available.
on your network. Click Next to continue.
The modes listed below are not available in the wizard, but can be manual y
Package Contents
configured. Please refer to the user manual on the CD for more information.
Step 6 - Select the wireless mode from the drop-down menu and then fol ow the
on-screen instructions to configure your DAP-1360.
Bridge Mode - The DAP-1360 wirelessly connects seperate local area networks
Step 7 - Once you are finished configuring your DAP-1360, you may disconnect the
DAP-1360 Wireless N Range Extender
(LANs) that can’t easily be connected together with a cable.
Bridge with AP Mode - The same as Bridge mode, but in this case, the device
Ethernet cable and place it in your network. Also, change your IP settings on your
computer back to the original values.
also acts as an access point.
Ethernet Cable
WISP Client Router Mode - The DAP-1360 wirelessly connects to a WISP (Wireless
For more information on configuration and advanced features, please refer to the
Internet Service Provider) AP. In this mode, the DAP-1360 also acts as a router for
manual on the supplied CD-ROM.
wired clients on your LAN and provides NAT (Network Address Translation) and a
Two Detachable Antennas
DHCP server to generate IP addresses for wired clients only.
Technical Support
WISP Repeater Mode - the DAP-1360 wirelessly connects to a WISP (Wireless
Having trouble instal ing your new product? D-Link’s website contains the latest
Internet Service Provider) AP. In this mode, the DAP-1360 also acts as a router for
user documentation and software updates for D-Link products. U.S. and Canadian
Power Adapter
both wireless and wired clients on your LAN.
customers can contact D-Link Technical Support through our website or by phone.
LEDs
United States
Canada
CD-ROM with Manual
Power LED - A solid light indicates a proper connection to the power supply.
Telephone: (877) 453-5465
Telephone: (800) 361-5265
Wireless LED - A blinking green light indicates the wireless function is working.
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
The light will blink fast during data transmission. The light will be off during
If any of the above items are missing, please contact your reseller.
device reboot or if the wireless radio is disabled.
©2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the
Security LED - A solid green light indicates that wireless security (WEP, WPA,
property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.
WPA2) is enabled.
LAN LED - A solid light indicates a connection to an Ethernet-enabled device.
DAP-1360
This LED blinks during data transmission.
Version 2.0 | June 3, 2010