Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung NETGEAR, modell RND2110v2

Hersteller: NETGEAR
Dateigröße: 426.8 kb
Dateiname:

Unterrichtssprache:enes

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten


Dieses Gerät hat auch andere Anweisungen:
Netzwerk - RND2110v2 (606.16 kb)en

Anleitung Zusammenfassung
























































































®
To set up your unit:
A configuration wizard displays. You must change the administrator’s password
during the inital configuration process.
Installation Guide
1. Place the unit in a location that provides adequate ventilation.
You might want to write your new password here:
High-capacity disks can produce considerable heat. It is important to ensure that the
fan exhausts are unobstructed.
ReadyNAS
2. Connect the power adapter to the back of the unit and plug the other end into a
® RAIDiator 5.3
wall outlet or power strip.
If you write your password here, be sure to keep this guide in a safe place.
3. Use an Ethernet cable to connect the Ethernet port on the ReadyNAS unit to your
9. Follow the wizard’s prompts to complete the initial configuration.
Package Contents
network.
4. If necessary, press the Power button to turn the unit on.
To recover a lost password:
Thank you for purchasing this NETGEAR product.
It takes about a minute to start up. The IP address is retrieved using DHCP.
If you lose your password, you can recover it using the password recovery question you
5. Install and run the RAIDar utility on a computer that is connected to the same local
provided during initial setup.
You need the following items from your
area network (LAN) as your ReadyNAS unit.
package to set up your ReadyNAS® unit.
RAIDar is located on the Resource CD that came with your unit. It includes versions
1. Using your browser, visit https:///password_recovery.
for the Windows, Mac, and Linux operating systems. It is also available at
Replace with the IP address of your ReadyNAS unit.
1. ReadyNAS unit
http://readynas.com/start.
2. Answer your password recovery question.
2. Resource CD
A new password is mailed to the email address you provided.
3. Power adapter
2
RAIDar automatically detects your ReadyNAS unit on the network.
4. Ethernet cable
Technical Support
For more information about setting up,
configuring, and using your system, see the
1
After installing your device, locate the serial number on the label of your product and use
appropriate software and hardware
3
it to register your product at http://www.NETGEAR.com/register. Registration is required
manuals for your unit. Links to these
before you can use the telephone support service. NETGEAR strongly recommends
manuals are included on the Resource CD
using this website to register your product.
that came with your unit and are also
4
For product updates and web support, visit http://readynas.com.
available at
http
://readynas.com/documentation.
For complete DoC, visit the NETGEAR EU Declarations of Conformity website at
http://support.netgear.com/app/answers/detail/a_id/11621/.
Basic Setup
For GNU General Public License (GPL) related information, visit
Follow these instructions to begin using your ReadyNAS unit. These instructions
6. Click the Setup button.
http://support.netgear.com/app/answers/detail/a_id/2649.
assume that the unit is using the factory default X-RAID2TM disk configuration and that at
An SSL certificate security warning displays. This is used to ensure an encrypted
least one disk is installed.
authentication and management session to the ReadyNAS unit and will not appear
again from the same browser.
Note: If you have a diskless unit, you must install at least one disk before following these
instructions. For a list of supported disks, see the Hardware Compatibility List at http://
7. Accept the certificate.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
readynas.com/hcl. For information about installing disks, see the hardware manual for
A login prompt displays.
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
your unit.
8. Enter admin for the user name and password for the password and click the OK
implementing the WEEE Directive.
button.
©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.


...

Dieses Handbuch ist für folgende Modelle:
Netzwerk - RND2210v2 (426.8 kb)
Netzwerk - RND4210v2 (426.8 kb)
Netzwerk - RND4410v2 (426.8 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien