Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
FS305_FS308_IG small.fm Page 2 Tuesday, August 7, 2012 10:05 AM
Technical Specifications
Performance Specifications
• If the Ethernet cable is connected to a NIC or other Ethernet
adapter, make sure that the card or adapter is installed
Standards compatibility
IEEE 802.3u 100BASE-TX Fast Ethernet
Frame filter rate
14,880 frames/sec max. for 10M port
correctly and is working.
IEEE 802.3i 10BASE-T Ethernet
148,800 frames/sec max. for 100M port
•
Make sure that the cable is less than 328 feet (100 meters).
IEEE 802.3x Flow Control
Frame forward rate
14,880 frames/sec max. for 10M port
Network interface
RJ-45 connector for 10BASE-T and
148,800 frames/sec max. for 100M port
Technical Support
100BASE-TX
Network latency (using 64- 100 Mbps:12 μs
Thank you for selecting NETGEAR products. After installing your
Power
12W max. and 12V @ 1.0A DC input
byte packets)
10 Mbps: 85 μs
device, locate the serial number on the label of your product.
Address database size
FS305: 2K MAC addresses
Use it to register your product at:
Power consumption (max.) FS305: 2.3W
FS308: 2.7W
FS308: 1K MAC addresses
http://www.NETGEAR.com/register.
Dimensions
FS305: 102 x 94 x 26 mm
Queue buffer
FS305: 384 KB embedded
Registration is required to use our telephone support service.
(4.02 x 3.7 x 1.02 in.)
FS308: 768 KB embedded
For product updates, additional documentation, and support go
FS308: 158 x 102 x 26 mm
(6.22 x 4.02 x 1.02 in.)
Troubleshooting
to: http://support.netgear.com.
Weight
FS305: 240 g (0.53 lbs)
The Power LED is not lit.
For complete DoC, go to the NETGEAR EU Declarations of Conformity
website at:
FS308: 441 g (0.97 lbs)
• Make sure that the power cord is correctly connected.
http://support.netgear.com/app/answers/detail/a_id/11621.
Operating temperature
0° to 40° C (32° to 104° F)
• Make sure that the power adapter is connected to a
WARNING: Do not stack equipment, or place equipment in tight
functioning power outlet or power strip.
Operating humidity
90% maximum relative humidity,
spaces, in drawers, or on carpets. Make sure your equipment is
non-condensing
• Make sure you that are using the NETGEAR power adapter
surrounded by at least 2 inches (5 cm) of air space.
supplied with your switch.
Safety agency approvals
CE mark, CB
This symbol was placed in accordance with the European Union Directive
for the power adapter
The Port LED for a device is off or stays on continuously.
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should
• Make sure that the cable connectors are securely plugged in
be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
at the switch and the device.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or
• Make sure that the connected device is turned on.
registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States
and/or other countries. Information is subject to change without notice. Other brand
and product names are registered trademarks or trademarks of their respective
holders. © 2012 NETGEAR, Inc. All rights reserved.
July 2012
For indoor use only in all EU countries and Switzerland.