Compatible Operating Systems
Minimum Server
HP-UX
HP-UX
HP-UX
VMS
Windows
Windows
Windows
Compatible
Firmware Version
11i v3
VMS
OLAR or OL*
Adapter
Recommended
Recommended EFI
6
6
8.3
Server
Server
Server
RHEL 3
RHEL 4
SLES 8
SLES 9
SLES 10
Boot
Supported
1
3
11i v1
11i v2
6, 8
8.2-1
& above
2003 EE
2003 DC
2008
2
Description
Adapter Firmware
Driver
Server
Required
Support
Supported
Peripherals
LTO 4 1840,
LTO3 960,
LTO2 448
,DAT 40
40,
DAT 70,
DAT 160
,DLT IV 40,
DLT IV 70,
DLT IV 80,
AT134A,
DLT VS 80,
DLT VS 160,
SC11Xe Host
n/a
n/a
rx2800 i2
103.39.00
Yes
VMS 8.4
No
No
SureStore
Bus Adapter
DLT 80,
SureStore
DLT VS 80
,SDLT 220,
SDLT 320,
SDLT 600
MSL2024/M
SL4048/MSL
8048/MSL80
96 DS2400,
DS21xx
NOTES:
1 HP recommends adapters in Superdomes be installed or replaced by a field service representative only.
2 Provided the server slot also supports OLAR or OL*. This feature is not supported by Linux or VMS.
3 Required PDC or EFI Version.
4 Bus Width cannot be configured off-line using BCH on rp54xx and rp24xx.
5 CAUTION: DS2100, DS2110, DS2120, and DS2300 devices are only supported at a maximum SCSI data transfer rate of U160. The SCSI data transfer rate must be limited to U160 (or slower) to avoid potential data integrity issues. The
SCSI bus will not automatically adjust to accommodate the DS2100 or the DS2110. The SCSI data transfer rate must be deliberately set to a maximum of U160; offline via the Boot Console Handler (PA RISC) or EFI (Integrity), or online
vi
via t
he
the m
ptconfig
p
com

mand W
.
ith
With the

D
S
DS2300 the

S
CSI
SCSI data

t
ransfer
transfer r
ate
rate w
ill
will autom

atically be

negotiated

t
o
to U
160
U160 (or

s
lower)
slower) but
,
the

negotiation

could

t
ake
take a
f
ew
few seconds

and

create

a
f
ew
few S
CSI
SCSI bus

resets

which
,
c
an
can be

av

oided
av
by


deliberately setting the maximum SCSI data transfer rate to U160.
6 HP-UX
After you view the table to determine the correct product configuration, check the driver release notes for your driver version to see if any patches are required.
To access Release Notes, go to: http://docs.hp.com under I/O Cards and Networking Software.
To access patches and download HP Integrity system firmware, go to: http://software.hp.com or http://itrc.hp.com
Select patch database, and search for the patch number. If not already registered, you can register for free on the ITRC home page.
The
Th H
P-UX
HP-UX driv

ers
driv
f
or
for the

products
products shown in
in this
this m
atrix
matrix a
re
are distributed on HP-UX
HP-UX s
erve
serv r
er and

workstation R
elease
Release M
edia
Media and

are

i
nstalled
installed w
ith
with a
n
an O
perating
Operating E
nv
n i
v ronment. Howeve
Howev r
e s
, om
some o
f
of t
he
the products

and

driv

ers
driv
listed

m
ay
may be

newer


than your system’s Operating Environment.
7 Not supported on Linux operating systems.
8 HP recommends that HP-UX 11i v3 users update to the newest available system and adapter firmware.
9 SC10 is not supported on HP-UX 11i v3.
10 Not supported on OpenVMS.
11 Supported as Core I/O only.
12 Boot from tape re
p
quires P
q
DC 44.28 or later.
Part number: 5900-2264
Go to http://www.hp.com/go/scsi-hba-docs for additional I/O card documentation.
Please send your feedback on this document to docsfeedback@hp.com
Legal Notices
© 2004-2012 Hewlett-Packard Company, L.P. The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty.
HP shall not be lilabl
i
e f
or
for t
e
t c
e hnic
hni al
a o
r
or edi

t
edi o
t r
o ial
i
er
e ror
rro s
rs or

omi

s
omi s
s i
s ons
i
c
ont
c
ai
ont ned
ai
her

ei
her n.
ei
HP-UX® , and Superdome® are registered trademarks of the Hewlett-Packard Corporation.
All other trademarks and registered trademarks are the property of the respective corporations.
HP Ultra320 SCSI Host Bus Adapter Support Matrix
Page 3 of 3

---

...

Dieses Handbuch ist für folgende Modelle:
Netzwerk - HP-UX 11i v3 I/O Cards (30.76 kb)