Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
PCI Error Recovery Product Note
Confirm PCI Error Recovery is Supported
NOTE
The sysrev command output on some systems includes extra zeros in the system
firmware version number. These zeros can be ignored. For example, 3.88 and 3.088
on Integrity systems are the same firmware version, also 23.1 and 23.001 on HP
9000 systems represent the same firmware version.
Step 3. The system firmware is the main component of the firmware recipe required to support PCI Error
Recovery. If you do not have the minimum system firmware version (or a later version) listed in the
PCI Error Recovery Support Matrix (http://docs.hp.com/en/ha.html), you do not have a firmware
recipe installed on your system that supports PCI Error Recovery.
Go to the Business Support Center Web site at http://www.hp.com/go/bizsupport for the latest
HP-UX 11i firmware updates. The IT Resource Center (ITRC) Web site at http://itrc.hp.com also
provides a link to the Business Support Center.
The system firmware files, installation instructions, and release notes with detailed firmware
version information can be obtained by selecting "Download Drivers and Software". This provides a
searchable database for various products, or you can follow the "Server" link to select the latest FW
download for your specific server product.
Be sure to read the Release Notes for the firmware to ensure a successful update.
Step 4. To confirm PCI Error Recovery is supported with your I/O card driver, see PCI Error Recovery
Support Matrix, HP-UX 11i v3 at: http://docs.hp.com/en/ha.html
Using ioscan to identify PCI Error Recovery Capability
The command "ioscan -P error_recovery" can be used to determine if Local Bus Adapters (LBA) in a system
support PCI Error Recovery feature. The capability of an LBA is in turn determined by the hardware
platform capability and the driver controlling the PCI adapter in the slot under that LBA.
The possible values for "error_recovery" attribute as displayed by the ioscan command are:
Supported - PCI error recovery is supported on the LBA and I/O adapter under that LBA. This is set only if
both platform and all the interface card driver instances under the given LBA support PCI error recovery
functionality.
Unsupported - PCI error recovery is not supported on the LBA and I/O adapter under that LBA. This could be
because either the platform or one of the interface card driver instances under the given LBA does not
support PCI error recovery functionality.
NOTE
The error_recovery attribute is supported for LBAs of PCI/PCI-X slots and PCIe slots.
Example:
To look at the error recovery capability of all Local Bus Adapters (LBAs) in the system:
Chapter
9
...Dieses Handbuch ist für folgende Modelle:
Netzwerk - HP-UX 11i v3 I/O Cards (184.06 kb)