Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Connect the power adapter to this product and power it on. O The LED of Power will illuminate after this step. 1-2. Apply the UTP cable to connect your Cable/DSL modem to this product’s Internet port. O The LED of Internet will illuminate after this step. 1-3. Use a network cable to connect your PCs’ Ethernet ports to one of this product’s LAN (1 to 4) ports. O The LED of LAN port you plugged into will illuminate after this step. STEP 2: INSTALLING WIZARD Note: To configure this device, you must have IE 4.01 or above installed. 1. Load the setup CD-ROM onto your computer. The auto-execution file will start automatically. - 1- ¡Зюяdband ; loti tor [Quick Setup Wizarc Basic Setup Tool for Windows View Q!G View Manual Browse CD Exit 2. Select Quick Setup Wizard. 3. The self-explanatory wizard will guide you through the installation procedure. Follow the on-screen instruction to proceed. STEP 3: CHECKING THE INTERNET CONNECTION You can open a new web browser to surf the Internet now. Should the access fail, you can check by the following steps: 3-1. go to 192.168.1.254; 3-2. select Network status\WAN IP Status in the left pane, 3-3. if the IP address field displays anything except 0.0.0.0, it means the Internet connection is well established. Otherwise (as illustrated below), repeat the whole procedures. Figure 3 - 2-...