Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Abocom Dateigröße: 1.8 mb Dateiname: hotmelt.pdf Unterrichtssprache:

They come pre-loaded with an adhesive that is not limited in shelf life, and the termination procedure provides the ability to reheat and reposition the fibre in the termination process. This easyto- install field mount connector provides reliable performance in indoor and outdoor applications and has no internal splice. All 3M™ Hot Melt connectors can be terminated using the same 3M™ Hot Melt Termination Kit 6365/6361. 3M™ LC Connectors require the 3M™ LC Expansion Kit 6650-LC which includes a weighted polishing jig to provide a PC centred apex end face. APPLICATIONS: The applications for the hot melt connector are based on industry standards for performance over environmental extremes. 3M™ HOT MELT CONNECTORS • Singlemode and multimode local area networks and campus wiring • Singlemode telephony central office and CATV headend • Environmental performance requirements exceeding ISO 11801, EN 50173 and EIA/TIA 568-B.3 • Singlemode reflection requirements of –55dB • Available in LC, ST, SC, FC singlemode and multimode connectors • Provides reliable performance in a wide range of indoor and outdoor applications 3M™ Hot Melt LC-Duplex Connector 3M™ Hot Melt ST-Connector FEATURES AND BENEFITS 3M™ HOT MELT CONNECTORS – LC, ST, SC, FC Meets ISO 11801, EN 50173 and EIA/TIA 568-B.3 standards for indoor Long term reliability and outdoor applications Ease of use on backbone and horizontal cable Quick termination in <2 minutes; high yield Allows custom length cable assemblies to be built on site Enhances cable management in telecom room or central office Minimizes cable slack Adhesive fibre retention Not dependent on mechanical retention alone 3M field polishing process produces <55dB reflection, singlemode Reliable in high speed transmission Pre-loaded adhesive No epoxy mixing or mess; no shelf life Re-heatable adhesive Allows fibre repositioning Blue dot of adhesive Easy to see when polishing is complete FEATURES AND BENEFITS SPECIFICATIONS MULTIMODE SINGLEMODE Product Number 6100 ST Series 8100 ST Series 6200 FC Series 8200 FC Series 6300 SC Series 8300 SC Series 6600 LC Series 8600 LC Series Testing Specification ISO 11801, EN 50173 and EIA/TIA 568-B.3 Operating Temperature* -10°C to +60°C Attenuation** <0.2dB typical Reflection*** -25dB typical -55dB typical Mating Durability 300 Matings <0.2dB change Storage Temperature -40°C to +85°C Materials and Identification Ferrule Zirconia ceramic Housing Body Nickel plated zinc (ST) Engineered resin (LC, SC, FC) Boot Thermoplastic elastomer Flame Retardancy UL-94 V-0 Adhesive Blue dot on ferrule *Multimode connectors tested at 850nm and 1300nm. **Singlemode connectors tested at 1310nm and 1550nm. ***Tested for 96 hours at 85°C, exceeding IEC standards. 3M™ ST Hot Melt Connector 2,9 mm 48,8 mm 10,4 mm 2,498 mm 9,7 mm 3M™ SC Hot Melt Connector 56,4 mm 8,9 mm 24,6 mm 2,498 mm 7,4 mm 2,9 mm 4,47 mm 50,27 mm 48,46 mm 28,78 mm 10,67 mm 3M™ FC Hot Melt Connector 2,9 mm 12,57 mm 6,25 mm 3M™ LC Hot Melt Connector 58,9 ...

Herunterladen

Geben Sie zwei Ziffern: