Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
4 Plug the power back into your DSL or cable modem. Please wait about one minute before continuing. 12V2AUSBLAN Modem DIR-820L Computer 5 Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power LED does not light up, press the Power button on the back of the router. 12V2AUSBWPSLANPOWER Modem DIR-820L Computer 6 After the router has powered up, verify that the Power (green) and Internet (orange or green) LEDs are both lit then continue with the Configuration section on the other side. 3 5 4 6 8 7 9 Network Requirements: • An Ethernet-based broadband modem Web-based Configuration Requirements: Computer with the following: • Windows® or Mac OS® X operating system • An installed Ethernet adapter or wireless adapter Supported Browsers: • Internet Explorer 7 or higher • Safari 4 or higher • Chrome • Firefox Make sure you have the latest version of Java installed. Visit to download the latest version. mydlink Requirements: • iPhone/iPad/iPod Touch (iOS 3.0 or higher) • Android device (1.6 or higher) • Web Browser Requirements: • Internet Explorer 7 or higher • Safari 5 or higher • Chrome • Firefox Note: To learn more about mydlink, visit Before you Start • Users with DSL providers -If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information. • Users with Cable providers -Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes. • Advanced Users -If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the DIR-820L router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. 1 Unplug the power to your DSL or Cable modem. Modem Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Ethernet Cable 2 Ethernet Port 12V2AUSBWPSLANINTERNETPOWER Internet Port (yellow) Modem DIR-820L Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router. 3 USBLAN DIR-820L Computer Ethernet Cable 1 Power LED A solid green light indicates a proper connection to the power supply. The light will be solid orange during boot-up and will blink green during the WPS process. 2 Internet LED A solid light indicates a connection to the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet. If this LED is blinking orange, this indicates that the “on demand” connection type is set and the Internet connection is idle. 3 USB Port Connect a USB flash drive to share content throughout your network. 4 WPS Button Press to start the WPS process. The Power LED will start to blink. 5 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles. 6 Internet Port Connect your broadband modem to this port using an Ethernet cable. 7 Power Button Press to power the router on and off. 8 Power Port Connect the supplied power adapter. 9 Reset Button Press and hold the reset button with a paper clip for six seconds to reset the router to the factory default settings. ENGLISHConfiguration Configuration B. QRS Mobile Setup Troubleshooting GPL Code Statement 4 Cable users (DHCP) click Next to continue. DSL (PPPoE) users enter your PPPoE user name and password supplied by your ISP. Click Next to continue. 5 For both the 2.4GHz and 5GHz bands, create a name for your Wi-Fi Network and a password. Your wireless devices (i.e., tablets, smartphones, and laptops) will need to have this information entered to be able to connect to your wireless network. 1 Scan the code below or search “QRS Mobile” (App Store or Google Play) to download the QRS Mobile App to your iPhone, iPad, or Android device. iOS Android QRS Mobile App Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the wireless network name as listed on the supplied Wi-Fi Configuration card/sticker. Select the network and then enter the Wi-Fi Password. 2 Wi-Fi Name(SSID) 2.4Ghz: dlink-2c19 Wi-Fi Name(SSID) 5GHz: dlink-2C1B-media Password:gccnu80856 3 4 Once connected, click on the QRS Mobile icon from your mobile device, then click Start to continue. Please follow the on-screen instructions to complete the setup. Once the Setup Complete screen appears, click Save and write down the new Wi-Fi Network name and password on your companion card for future reference. Note: To reconnect to your router, launch your wireless utility, select the new Wi-Fi Network you created, and then enter your new Wi-Fi password. How do I connect my wireless devices to the DIR-820L router? 1. Open your wireless network utility that displays available wireless networks. 2. Select the Wi-Fi Netwo...