Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Using the Network Management Card Wizard . . . . . . . . . . . . . . . .5 File Transfers 10 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Upgrading Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Verifying Upgrades and Updates . . . . . . . . . . . . . . . . . . . . . . . .22 Updating Configuration Settings 23 Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Using the APC Security Wizard 25 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Create a Root Certificate & Server Certificates . . . . . . . . . . . . . . . . 29 Create a Server Certificate and Signing Request . . . . . . . . . . . . . . 34 Create an SSH Host Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 i Network Management Card Wizard Network Management Card Wizard ®®®® ADDENDUMNetworkAIR ACPA4000 Introduction Overview The APC Network Management Card Wizard is a Microsoft® Windows® application that pre-configures and reconfigures single or multiple Management Cards of APC devices. . You cannot use the Wizard to upgrade the firmware for a Management Card. Instead, use FTP, SCP, or XMODEM. See Upgrading Firmware. The Wizard works locally through the serial port of your computer or remotely over your TCP/IP network. Using the Wizard to configure the Network Management Cards of your NetworkAIR PA Portable Air Conditioners, you can do the following: • Automatically discover unconfigured Network Management Cards remotely or locally • Initially configure multiple Network Management Cards • Reconfigure multiple Network Management Cards after they are deployed Not all features in the user interface of the Network Management Card Wizard are supported for NetworkAIR PA Portable Air Conditioners. Use only the features documented in this addendum. 1 ADDENDUM NetworkAIR ACPA4000 System requirements The Wizard runs on Windows® 98, Windows NT®, Windows 2000, Windows 2003, and Windows XP Intel-based workstations. The Network Management Card Wizard uses FTP to transfer files. If you are using Secure CoPy (SCP) and have disabled the FTP server, you must temporarily enable it to use the Wizard to configure settings of a Network Management Card. Configuring Network Management Card settings Using the Wizard, you can configure basic settings locally or remotely for the Network Management Cards. The Wizard cannot configure the following settings for the Network Management Card: • Event action settings • Email settings • DNS settings Installing the Wizard If autorun is enabled on your CD drive, a page will open automatically in your browser when the CD is inserted. Navigate to the Management Card Wizard page, and select Install the Wizard. Otherwise, run the setup.exe installation program found in the Wizard directory and follow the on-screen instructions. During installation, a shortcut link is created in the Start menu. Use this link to launch the Wizard application. Online Help To access the Wizard’s online help, click Help at the lower left on the Wizard screen. ® ®®®® 2 The Wizard is used with many APC devices, and some features described in the online help are not available with NetworkAIR PA Air Conditioners. Quick configuration of the required settings You can configure the required TCP/IP settings quickly using the Wizard. See Configuring the required TCP/IP settings. Initially configuring Management Cards of NetworkAIR PA Air Conditioners To configure Network Management Cards initially, use the Wizard to configure the settings of each Management Card locally. See Pre-configuring the Network Management Card. ADDENDUM NetworkAIR ACPA4000 ® ®®®® 3 ADDENDUM NetworkAIR ACPA4000 Reconfiguring multiple Network Management Cards To reconfigure multiple Network Management Cards: 1. Deploy your NetworkAIR PA Portable Air Conditioners without any pre- configuration. 2. Configure the TCP/IP settings of each NetworkAIR PA Air Conditioner remotely through auto-discovery of its Management Card. See Configuring the required TCP/IP settings. The Network Management Cards can also use a DHCP server to assign the TCP/IP settings. See the Boot Mode description in the NetworkAIR ACPA4000 User’s Guide See also (990-1702-EN.pdf) on the Utility CD. 3. Reconfigure other settings of the Management Cards of NetworkAIR PA Air Conditioners remotely. See Reconfiguring deployed Network Management Cards. To perform this procedure, the FTP server must be enabled. ® ®®®® 4 ADDENDUM NetworkAIR ACPA4000 Using the Network Management Card Wizard Configuring the required TCP/IP settings To configure the Network Management Card’s required TCP/IP settings remotely: 1. Contact your network administrator to obtain valid TCP/IP settings. 2. From the Start menu, launch the Wizard application. The Wizard automatically detects any unconfigured Network Manageme...