Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
The following screen displays: Figure 6. Live Parent Controls screen 1.On the Live Parental Controls screen, click either the Windows Users or Mac Users button. 2.Follow the onscreen instructions to download and install the NETGEAR Live Parental Controls Management utility. After installation, Live Parental Controls automatically starts. 3.Click Next, read the note, and click Next again to proceed. You are prompted to log in or create a free account. 4.Select the radio button that applies to you and click the Next button. •If you already have an OpenDNS account, leave the Yes radio button selected. •If you do not have an OpenDNS account, select the No radio button. A screen displays that lets you set up a free OpenDNS account. After you log on or create your account, the filtering level screen displays: 5.Select the radio button for the filtering level that you want and click the Next button. 6.Click the Take me to the status screen button. Parental controls are now set up for the router. The dashboard shows Parental Controls as enabled. The next time that you select Parental Controls on the BASIC Home screen, you can sign in to your free OpenDNS account and manage the parental controls. Figure 7. Sign in to your OpenDNS account screen Adding a wireless guest network allows visitors at your home to use the Internet without seeing your passphrase. You can also specify the degree of access that you give to visitors. 1.Select BASIC > Guest Network. 2.The Guest Network Settings screen displays: 3.Select or clear any of the following optional check boxes: •Enable Guest Network. If this check box is selected, the guest network is enabled, and guests can connect to your network using the SSID of this profile. By default, this check box is cleared. •Enable SSID Broadcast. If this check box is selected, the router broadcasts its SSID to all wireless devices. This check box is selected by default. •Allow guest to access My Local Network. If this check box is selected, any user who connects to this SSID has access to your local network, not just Internet access. This check box is selected by default. •Enable Wireless Isolation. If this check box is selected, wireless devices that join the network can use the Internet, but cannot access each other or access Ethernet devices on the network. By default, this check box is cleared. 4.Give the guest network a name (SSID). The guest network name is case-sensitive and can be up to 32 characters. The default guest SSID is NETGEAR_Guest. This SSID is in addition to the regular SSID that you set up on the Wireless Settings screen (see Wireless Settings Screen Fields on page 29). 5.Select a security option for the guest network. The security options that are available for the wireless guest network are the same options that are available for the regular wireless network (see WPA-PSK, WPA2-PSK, and WPA-PSK + WPA2-PSK Mixed Mode on page 31, WPA/WPA2 Enterprise on page 32, and WEP on page 33). By default, the wireless guest network has no security (no authentication or encryption). However, NETGEAR recommends that you do select a security option. 6.Click the Apply button. Your changes are saved. 4. genie ADVANCED Home Specify custom settings This chapter describes the features that are available from the genie ADVANCED Home screen. This chapter contains the following sections: •Setup Wizard •WPS Wizard •Setup Menu •WAN Setup •LAN Setup •QoS Setup The following menu selections that you can access from the ADVANCED Home screen are described in separate chapters: •Security. For information, see Chapter 5, Security. •Administration. For information, see Chapter 6, Administration. •Advanced Setup. For information, see Chapter 7, Advanced Settings. The NETGEAR genie installation process is launched with the Setup Wizard the first time that you start the router. After you have set up the router, the genie installation process no longer launches automatically, but you can launch the Setup Wizard manually. 1.Select ADVANCED > Setup Wizard. A screen similar to the following displays: 2.Select the Yes radio button, and click the Next button. The next screen displays: If you select the No, I want to configure the router myself radio button, the Internet Setup screen displays. For information about the Internet Setup screen, see Internet Setup on page 26. The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration. When the Setup Wizard is successful, the following screen displays: WPS Wizard The WPS Wizard helps you add a WPS-capable client (a computer or other wireless device) to your network. On the client, you must either press its WPS button or locate its WPS PIN. 1.Select ADVANCED > WPS Wizard. The Add WPS Client screen displays. 2.Click the Next button. The screen that displays lets you select the method for adding the client: 3.Select one of the following radio buttons: •Push Button. To use the push-button method, do the following: a.E...