Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Fotos und technische Daten NETGEAR R7000 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
. . . . . . . . . . . . . . . . . . . . . . . . . . 6 Join the WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Prioritize with Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Share a USB Drive on the Network . . . . . . . . . . . . . . . . . . . . . . . . 13 NETGEAR genie App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ReadySHARE Vault Backup App . . . . . . . . . . . . . . . . . . . . . . . . . 15 More Premium Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Install Your Router Make sure that your Internet service is active before you install your router. a. Align the antennas with the antenna posts on the router. b. Attach the antennas on the threaded antenna posts. c. Position the antennas for the best WiFi performance. NETGEAR recommends that the center antenna be vertical and that you aim the others outward at 45 degree angles, as shown. a. Unplug your modem’s power. b. If the modem has a battery backup, remove its batteries. c. If your modem was already connected to another router, disconnect the cable between your modem and that router. Make sure that your modem is turned off and is cabled only to the wall jack for your Internet service. a. Plug in, then turn on your modem. (Replace the batteries if you removed them previously.) b. With the yellow Ethernet cable that came with the router, connect your modem to the Internet port of your router. a. Connect the power adapter to the router, and plug the power adapter into an outlet. b. Wait for the Power LED on the front panel to light amber and turn white. If no LEDs are lit, press the Power On/Off button on the rear panel of the router. You can use an Ethernet cable or connect with WiFi: • For a wired connection, use an Ethernet cable (not included) to connect your computer to a black Ethernet LAN port on your router. • To connect with WiFi, use the WiFi settings on the router label. The first time that you connect to the router, the genie screen displays. Follow the genie steps to connect to the Internet. If the genie screen does not display, try the following: • Close and reopen the browser. • Make sure that your computer is connected to one of the four black LAN Ethernet ports on the router, or that you are connected to your WiFi network. • Make sure that the router has full power, and that its Power LED is lit. • If your computer is set to a static or fixed IP address (this is uncommon), change it to obtain an IP address automatically from the router. If you still do not see the genie screen, log in to the router so that genie can detect your Internet connection. 1. In the address field of your web browser, type or A login screen displays. 2. Enter admin for the user name and password for the password. The router BASIC Home screen displays. If your Internet connection is not set up yet, genie automatically detects your Internet connection. LEDs The LEDs on the top of the router light to indicate router activity: Power Internet 2.4 GHZ WiFi 5 GHZ WiFi USB 1 (USB 3.0 port on the front panel) USB 2 (USB 2.0 port on the rear panel) Ethernet ports 1–4 WiFi On/Off button with LED WPS button with LED WiFi Network and Security The preset WiFi network name (SSID) and network key (password) are unique to your router, like a serial number. Because the router automatically uses WiFi security, you don’t need to set it up. The WiFi settings are on the label. NETGEAR recommends that you use the preset WiFi settings because you can check the router label if you forget them. NETGEAR genie lets you change these settings if you want. If you do so, write down the new WiFi settings and store them in a safe place. You can write the WiFi settings from your router’s label in this space for easy reference. WiFi network name (SSID): Network key (password): If you change the WiFi settings, write the new settings here for easy reference and store this booklet in a safe place. WiFi network name (SSID): Network key (password): Join the WiFi Network You can either use Wi-Fi Protected Setup (WPS) or select your WiFi network and type its password. 1. Press the WPS button on the router. 2. Within two minutes, on your computer or wireless device, press its WPS button or click its onscreen WPS button. For help with the WPS button on your computer or wireless device, check the instructions or online help that came with that computer or device. Some older equipment cannot use WPS. 1. On your computer or wireless device, open the software that manages its WiFi connections. This software scans for WiFi networks in your area. 2. Find and select your WiFi network. The WiFi network name and password are on the router’s label. 3. Enter the WiFi password and click the Connect button. After you use genie to set up the router, you can log in to the router to view or change its settings. Log In to the Router 1. Connect a computer or wireles...