Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
– Time for sending log Specifies the time of day to send the log. Relevant when the log is sent daily or weekly. If the Weekly, Daily or Hourly option is selected and the log fills up before the specified period, the log is automatically e-mailed to the specified e-mail address. After the log is sent, the log is cleared from the router’s memory. If the router cannot e-mail the log file, the log buffer may fill up. In this case, the router overwrites the log and discards its contents. The RangeMax NEXT Wireless Router uses the Network Time Protocol (NTP) to obtain the current time and date from one of several Network Time Servers on the Internet. In order to localize the time for your log entries, you must specify your Time Zone: • Time Zone—Select your local time zone. This setting will be used for the blocking schedule and for time-stamping log entries. • Daylight Savings Time—Check this box if your time zone is currently under daylight savings time. 3-10 Content Filtering v1.0, 2006-04 Chapter 4 Maintenance This chapter describes how to use the maintenance features of your RangeMax NEXT Wireless Router Gigabit Edition Model WNR854T. These features can be found by clicking on the Maintenance heading in the Main Menu of the browser interface. v1.0, 2006-04 RangeMax NEXT Wireless Router Model WNR854T Reference Manual How to Manually Configure Your Internet Connection You can manually configure your router using the Basic Settings menu, shown below. ISP Does Not Require Login ISP Does Require Login Figure 4-1 You can manually configure the router using the Basic Settings menu shown in Figure 4-1 using these steps: 1. Connect to the wireless router by typing in the address field of your browser, then click Enter. 4-2 Maintenance v1.0, 2006-04 RangeMax NEXT Wireless Router Model WNR854T Reference Manual 2. For security reasons, the wireless router has its own user name and password. When prompted, enter admin for the router user name and password for the router password, both in lower case letters. 3. Click Basic Settings on the Setup menu. 4. If your Internet connection does not require a login, click No at the top of the Basic Settings menu and fill in the settings according to the instructions below. If your Internet connection does require a login, click Yes, and skip to step 5. a. Enter your Account Name (may also be called Host Name) and Domain Name. These parameters may be necessary to access your ISP’s services such as mail or news servers. b. Internet IP Address: If your ISP has assigned you a permanent, fixed (static) IP address for your computer, select Use Static IP Address. Enter the IP address that your ISP assigned. Also enter the net mask and the Gateway IP address. The Gateway is the ISP’s router to which your router will connect. c. Domain Name Server (DNS) Address: If you know that your ISP does not automatically transmit DNS addresses to the router during login, select Use These DNS Servers and enter the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is available, enter it also. Note: If you enter an address here, restart the computers on your network so that these settings take effect. d. Router’s MAC Address: This section determines the Ethernet MAC address that will the router will use on the Internet port. Some ISPs will register the Ethernet MAC address of the network interface card in your computer when your account is first opened. They will then only accept traffic from the MAC address of that computer. This feature allows your router to masquerade as that computer by “cloning” its MAC address. To change the MAC address, select Use Computer MAC Address. The router will then capture and use the MAC address of the computer that you are now using. You must be using the one computer that is allowed by the ISP. Or, select Use this MAC address and type it in here. e. Click Apply to save your settings. Maintenance 4-3 v1.0, 2006-04 RangeMax NEXT Wireless Router Model WNR854T Reference Manual 5. If your Internet connection does require a login, fill in the settings according to the instructions below. Select Yes if you normally must launch a login program such as Enternet or WinPOET in order to access the Internet. Note: After you finish setting up your router, you will no longer need to launch the ISP’s login program on your computer in order to access the Internet. When you start an Internet application, your router will automatically log you in. a. Select your Internet service provider from the drop-down list. Figure 4-2 Note: Not all ISPs are listed here. The ones on this list have special requirements. b. The screen will change according to the ISP settings requirements of the ISP you select. c. Fill in the parameters for your Internet service provider. d. Click Apply to save your settings. Click the Test button to verify you have Internet access. 4-4 Maintenance v1.0, 2006-04 RangeMax NEXT Wireless Router Model WNR854T Referenc...