Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Netzwerk - WNR1000v1 (306.74 kb)
Netzwerk - WNR1000v1 (371.23 kb)
Anleitung Zusammenfassung
When the Smart Wizard prompts you about updates, click Ye s to check for updates for your router, or No, to update later (for more information, see “Setting Up Your Router for Internet Access” on page 18, or the online User Manual). 4. Follow the remaining instructions and prompts. The Smart Wizard guides you through installing your router, connecting your router to the Internet, configuring your wireless network settings, and selecting the optimum security protection for your network. If you choose not to select a security option during installation, you can always access the router’s user interface later to select a security option (see “Configuring Your Wireless Network” on page 21). For optimum performance of your high-speed wireless router, the wireless adapter card for each computer in your network should support the same technology as your router. For more information, see the online User Manual. At the close of installation, the Smart Wizard places a Router_Setup.html file on your computer’s desktop so that you can view the router settings. It also places the Router Login shortcut on the desktop for you to access the router’s main menu. You are now connected to the Internet. Figure 5 To set up additional wireless computers in your network to access the router and connect to the Internet, see “Configuring Your Wireless Network” on page 21. Installing Your Router Using the Smart Wizard Accessing Your Router After Installation The Smart Wizard only appears when you first install the router or when the router is in its factory default state (for example, if you have reset the router to its default factory settings). If you want to change the settings after installing and configuring your router using the Smart Wizard, you must open a browser window and log in to the router. You will also be prompted to check for new router firmware. For more information, see “Configuring Your Wireless Network” on page 21. Installing Your Router Using the Smart Wizard Installing Your Router Using the Smart Wizard Manually Installing Your Router Before installing and connecting your router manually, review the list below and make sure that you have all of the necessary information. Use the procedures in this topic if you are an advanced user, or a user of Macintosh and Linux systems. • Internet service connection through an Internet Service Provider (ISP). • The configuration information your ISP gave you. Depending on how your Internet account was set up, you might need the following information to set up your wireless router and access the Internet: – Host and domain name – Internet login name and password (frequently an email address and password) – Domain Name Server (DNS) addresses – Fixed or static IP address Your ISP should have provided you with all the information needed to connect to the Internet. If you cannot locate this information, ask your ISP. • If you have cable modem service, make sure that you are using the same computer on which you first set up your Internet account. If you have not already done so: • Check the package contents of your router to ensure that it is complete (see “Unpacking Your New Router” on page 1”). • Select an optimum location for your wireless router after reviewing the guidelines presented in “Positioning Your Wireless Router” on page 5.” Manually Installing Your Router Connecting Your Wireless Router Before you install your wireless router, make sure that the Internet Protocol (TCP/IP) Property settings on your computer are set to “automatically obtain an IP address” using DHCP and “Obtain DNS server address automatically.” You can check these settings by looking at the TCP/IP Properties of your Internal Network Connections, which are accessible through the Control Panel of your computer. If you are unsure about this, refer to the documentation for your computer or see the link to TCP/IP Addressing in “Related Documents” on page 41. If you are replacing an existing router, disconnect it completely from your network and set it aside before starting to install your new router. Then, skip to step 5 in the following procedure NETGEAR does not recommend or support adding a NETGEAR router behind another router, or replacing a gateway with a NETGEAR router. To connect the wireless router, the computer, and the modem: 1. Turn off your computer. 2. Turn off and unplug the cable or DSL broadband modem. 3. Locate the cable (A) that connects your computer to the modem. 4. Disconnect the cable at the modem end only (B). You will connect it to the router later. A B Figure 6 Manually Installing Your Router 5. Locate the Ethernet cable that came with your NETGEAR product. Securely insert one end of the Ethernet cable into your modem (C) and the other end into the Internet port of the wireless router (D). (The cable and the Internet port label are color coded.) CD Figure 7 6. Locate the cable (A) that is still attached to your computer (see step 4). Securely insert that cable into a port on the r...