Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
41 Getting to Know Your Wireless Router Congratulations on your purchase of a NETGEAR® high-speed wireless router, the N150 Wireless Router Model WNR1000v2h2. Before you begin installing your router, check the package contents (see “Unpacking Your New Router” on page 1). Become familiar with the front and back panels of your router—especially the status lights—and the important information on the router label (see “Hardware Features” on page 2). Then, read the section on “Positioning Your Wireless Router” on page 5 to ensure that you have selected the best location to install your router. Unpacking Your New Router Your product package should contain the following items: • The N150 Wireless Router • An AC power adapter (varies by region) • A yellow Ethernet cable • NETGEAR Installation Guide • The Resource CD, which includes: – The Smart Wizard Installation Assistant (Autorun.exe) – A PDF version of this manual – A link to the online User Manual A link to the online User Manual is also available from the router interface, after the router is installed. Click Documentation on the main menu. If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair. Getting to Know Your Wireless Router To prepare your router for installation: 1. Carefully peel off any protective film covering the sides of your router. 2. Place your router in a suitable area for installation (near an AC power outlet and accessible to the Ethernet cables for your wired computers). Hardware Features Before you install and connect your router, take a moment to become familiar with the front and back panels of the router—especially the status lights on the front panel. Front Panel The router front panel, shown in Figure 1, contains status lights. (For more information on interpreting the status lights, see “Verifying Your Connection” on page 15 and “Checking Basic Router Functions” on page 29.) 12 3 4 5 Figure 1 Getting to Know Your Wireless Router You can use the status lights to verify various conditions. Table 1. Status Light Descriptions Label Activity Description 1. Power Solid Amber Solid Green Fast blink–Green Slow blink–Green Off The router is performing the power-on self-test diagnostic. The power is on and the router is ready. A software update is in progress. Firmware is corrupted. See “Checking Basic Router Functions” on page 29 for instructions on restoring your router firmware. Power is not being supplied to the router 2. Push 'N' Connect Solid Green Blinking Green Off Indicates that wireless security is enabled. WPS-capable devices can associate with the router within 2 minutes. No WPS connection exists. 3. Internet Solid Amber Solid Green Blinking Green Off No IP address acquired. The wireless router has acquired an Internet address. Data is being communicated with the Internet. No Ethernet cable is connected to the modem. 4. Wireless Solid Blue Blinking Blue Off The wireless interface is enabled. Data is being communicated over the wireless network. The wireless interface is turned off. 5. LAN (Ports 1–4) Solid Green Blinking Green Solid Amber Blinking Amber Off The local port is connected to a 100 Mbps device. Data is being transmitted at 100 Mbps. The local port is connected to a 10 Mbps device. Data is being transmitted at 10 Mbps. No link is detected on this port. Getting to Know Your Wireless Router Back Panel The router back panel, shown in Figure 2, contains port connections. 1 5 23 4 Figure 2 Viewed from left to right, the rear panel contains the following elements: 1. AC power adapter outlet for connecting the power adapter. 2. Power on/off push-button. 3. Internet/Wide Area Network (WAN) Ethernet port for connecting the router to a cable or DSL modem. 4. Four Local Area Network (LAN) 10/100 Mbps Ethernet ports for connecting the router to your local computers. 5. Restore factory settings button. Press for approximately 5 seconds to reset the router to the factory default settings. Side Panel The router side panel is shown in Figure 3. Figure 3 1 2 Getting to Know Your Wireless Router 1. WPS button – Turns Push ‘N’ Connect (WPS) security on and off. When wireless security is enabled, the Push ‘N’ Connect LED on the front of the wireless router is solid green. See “Push 'N' Connect” on page 3. 2. Wireless On/Off button – Turns the Wireless network on and off. When the Wireless network is enabled, the Wireless LED on the front of the router is solid green. See “Wireless” on page 3. Router Label The label on the bottom of the wireless router shows the router’s MAC address, serial number, security PIN, and factory default login information. The ports on the router are color-coded to distinguish your Internet port from the other four ports that connect to the wired computer(s) on your Local Area Network (LAN). Figure 4 Positioning Your Wireless Router The wireless router lets you access your ne...
Dieses Handbuch ist für folgende Modelle:Netzwerk - WNR1000v2 (769.7 kb)