Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power. N600 Wireless Router (not included) Laptop or desktop computer N600 Wireless Router Package Contents N600 Wireless Dual Band Router WNDR3400v3 Installation Guide Power adapter Ethernet cable If the web page doesn’t display, close and reopen the browser and enter in the address bar. The user name and (with stand attached) Connect the power adapter to then router, then plug it into an outlet. If none of the LEDs light, make sure the Power On/Off button is in the on position (pushed in). Attach the stand to the router: 1. Position the router so that the Power button is at the bottom and the USB port is at the top. 2. Snap each piece of the stand onto a bottom corner of the router. 2.4GHz Step 1: Unplug the power to turn off your modem. Step 5: Connect your computer Use another Ethernet cable to establish a wired connection as shown in this diagram. Optionally, connect wirelessly by using the preset wireless security settings located on the product label. Router stand (two pieces) Power On/Off to the router ( ). password are on the product label. US SB o Wait for the 2.4 GHz LED ( ) to light. DSL or cable Internet 4 NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. For indoor use only. Valid in all EU member states, EFTA states, NETGEAR, Inc. April 2013 and Switzerland. 350 East Plumeria Drive San Jose, CA 95134 USA Preset Wireless Security This product has a unique WiFi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is on the product label. NETGEAR recommends that you do not change the preset SSID or password. If you do change the settings, the information on the product label does not apply. Find the preset wireless settings on your router and record them here: WiFi network name (SSID) _______________________________ Network key (password) ________________________________ If you change the preset wireless settings, record them here: Wireless network name (SSID) _______________________________ Network key (password) _____________________________________ If necessary to retrieve or update your password, type in a web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset SSID is on the product label. Note: If you changed the name of your network during the setup process, look for that network name. 3. Enter the preset password (or your custom password if you changed it) and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method If your wireless device supports WPS (Wi-Fi Protected Setup), NETGEAR calls this method Push 'N' Connect, you might be prompted to press the WPS button on the router instead of entering a password. If you are prompted: 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device is then connected to your router. 3. Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it does not work. Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates, web support, and troubleshooting tips, visit NETGEAR recommends that you use only the official NETGEAR support resources. You can get the user manual online at or through a link in the product’s user interface. For the free Live Parental Controls centralized Internet site filtering software for your router, download from: For additional features, including Traffic Metering, ...