Login:
Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Anleitung NETGEAR, modell WGR101

Hersteller: NETGEAR
Dateigröße: 276.56 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:
Netzwerk - WGR101 (140.89 kb)en
Netzwerk - WGR101 (1.89 mb)en

Anleitung Zusammenfassung


Start Here Use this guide to quickly set up your router. For advanced options, see the latest manual at Quick Plug and Play Installation These instructions assume the following: • You will connect the WGR101 wireless travel router to an RJ45 wall port in an office or hotel, or a broadband router at home. • Wireless WEP security is disabled. • One or more wireless computers will connect to the WGR101 wireless travel router. Use WEP to protect sensitive data, according to the instructions in the Reference Manual on the CD. 1. First, install the 54 Mbps Wireless Travel Router WGR101 a. Connect an Ethernet cable to the port on the WGR101 wireless travel router. If you are traveling, connect the other end of the cable to an RJ45 port in the wall. If you are at home or in an office, connect the other end of the cable to a switch, router, or cable modem with a broadband Internet connection. .......................... Position 1: Single User Position 2: Multiple Users Position 3: Configuration Position 4: Unused ...................................... b. The WGR101 wireless travel router ships with the switch in position 1 for a single user. If multiple computers will use the wireless travel router, change the switch position to 2. c. Connect the power cord to the WGR101 and plug it into an outlet. The Power LED lights up. The WGR101 automatically broadcasts a wireless signal. Power Wireless Port Ethernet Port d. Check the WGR101 wireless travel router status lights to verify the following: • Power: The power light should turn solid green. When you first turn on the router, the power light blinks during its self test, then turns solid green. If it does not, see the Troubleshooting Tips in the manual. • Wireless: The wireless light should be lit. If the Wireless light is not lit, see the Troubleshooting Tips in the manual. • Ethernet: The Ethernet light should only be lit when an Ethernet cable is connected to the unit and is also connected to a powered on computer or network device at the other end. 2. Now, configure each wireless computer a. On your computer, set NETGEAR-TRAVEL as the SSID for each computer that will use the WGR101. Tip: If you are typing the SSID, note that it is case sensitive and must match the WGR101 SSID exactly. b. The wireless LED on the WGR101 is on when wireless communication is enabled. This LED flashes during data transfer. Troubleshooting Tips Here are some tips for correcting simple problems you may have. Make sure the wireless settings in the computer and router match exactly. The Wireless Network Name (SSID) and WEP security settings of the router and wireless computer must match exactly. Make sure the network settings of the computer are correct. Ethernet cable and wirelessly connected computers must be configured to obtain IP and DNS addresses automatically via DHCP. For help with this, please see the animated tutorials on the CD or the Reference Manual Appendix C on the CD. Check the router status lights to verify correct router operation. If the Power light does not turn solid green within 2 minutes of turning the router on, reset the router as described in the Reference Manual on the CD. Do not connect the WGR101 directly to a DSL modem. Connecting the WGR101 directly to a DSL modem is not supported. When connecting to a router that uses 192.168.0.x, avoid address conflicts. In single user mode, this is not a problem. In multi-user mode, you need to change the WGR101 LAN IP address and DHCP server pool according to the instructions in the help screens or Reference Manual. Single and Multi-User Setup Options Use these charts to identify setup options for the WGR101. Multi-User Setup Options — Switch Position 2 .................................................................. Single User Setup Options — Switch Position 1 .................................................................. Type of Use Recommended Setup Application Usage Switch Position on the Unit Comment One computer Quick Exclusive 1 No configuration access, casual use, Installation (No access for the (default setting) required. no sensitive data. WEP security) first computer to select this SSID. One computer working in a setting such as a hotel room where others may abruptly connect to this SSID. Or, working with sensitive data and needing to encrypt and use a secure wireless connection. Single user with WEP security. NETGEAR recommends this setup. Exclusive access and reserves the connection for you with matching WEP keys. First, change to position 3 to configure WEP security, then change to position 1 to connect as a single user with WEP security. See instructions in the User manual for configuring WEP security settings. Type of Use Recommended Setup Application Usage Switch Position on the Unit Comment Multiple Quick Installation Shared among 2 No configuration computers, (No WEP computers that required. casual use, no Security), use this SSID. sensitive da...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien