Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Source IP The IP address of the initiating device for this log entry. Restricting Access From Your Network v1.0, September 2009 NETGEAR Wireless-N 300 Router JWNR2000 User Manual Table 3-1. Log Entry Descriptions Field Description Target address The name or IP address of the website or newsgroup visited or to which access was attempted. Action Whether the access was blocked or allowed. To refresh the log screen, click the Refresh button. To clear the log entries, click the Clear Log button. To e-mail the log immediately, click the Send Log button. Configuring E-mail Alert and Web Access Log Notifications To receive logs and alerts by e-mail, you must provide your e-mail account information. To configure e-mail alert and web access log notifications: 1. Select E-mail under Content Filtering in the main menu. The E-mail screen displays. Restricting Access From Your Network v1.0, September 2009 NETGEAR Wireless-N 300 Router JWNR2000 User Manual Figure 3-6 2. To receive e-mail logs and alerts from the router, select the Turn E-mail Notification On check box. a. Enter the name of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com) in the Your Outgoing Mail Server field. You might be able to find this information in the configuration screen of your e-mail program. If you leave this field blank, log and alert messages will not be sent by e-mail. b. Enter the e-mail address to which logs and alerts are sent in the Send To This E-mail Address field. This e-mail address will also be used as the From address. If you leave this field blank, log and alert messages will not be sent by e-mail. 3. If your e-mail server requires authentication, select the My Mail Server requires authentication check box. a. Enter your user name for the e-mail server in the User Name field. Restricting Access From Your Network v1.0, September 2009 NETGEAR Wireless-N 300 Router JWNR2000 User Manual b. Enter your password for the e-mail server in the Password field. 4. You can specify that logs are automatically sent by e-mail with these options: • Send alert immediately. Select this check box for immediate notification of attempted access to a blocked site or service. • Send Logs According to this Schedule. Specifies how often to send the logs: Hourly, Daily, Weekly, or When Full. – Day. Specifies which day of the week to send the log. Relevant when the log is sent weekly or daily. – Time. Specifies the time of day to send the log. Relevant when the log is sent daily or weekly. If you select the Weekly, Daily, or Hourly option and the log fills up before the specified period, the log is automatically e-mailed to the specified e-mail address. After the log is sent, the log is cleared from the router’s memory. If the router cannot e-mail the log file, the log buffer might fill up. In this case, the router overwrites the log and discards its contents. 5. Click Apply to save your settings. So that the log entries are correctly time-stamped and sent at the correct time, be sure to set the time as described in the next section. Setting the Time Zone The JWNR2000 router uses the Network Time Protocol (NTP) to obtain the current time and date from one of several network time servers on the Internet. Localize the time zone so that your log entries and other router functions include the correct time stamp. To verify and set the time zone (see Figure 3-6 on page 3-8): • Time Zone. To select your local time zone, use the drop-down list. This setting is used for the blocking schedule and for time-stamping log entries. • Automatically Adjust for Daylight Savings Time. If your region supports daylight savings time, select this check box. The router will automatically adjust the time at the start and end of the daylight savings time period. Restricting Access From Your Network v1.0, September 2009 NETGEAR Wireless-N 300 Router JWNR2000 User Manual Restricting Access From Your Network v1.0, September 2009 Chapter 4 Customizing Your Network Settings This chapter describes how to configure advanced networking features of the Wireless-N 300 Router Model JWNR2000, including LAN, WAN, and routing settings. It contains the following sections: • “Using the LAN IP Setup Options” • “Using a Dynamic DNS Service” on page 4-6 • “Configuring the WAN Setup Options” on page 4-8 • “Configuring Static Routes” on page 4-10 • “Wireless Repeating (Also Called WDS)” on page 4-12 Using the LAN IP Setup Options The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP). v1.0, September 2009 NETGEAR Wireless-N 300 Router JWNR2000 User Manual To configure LAN IP settings, select LAN Setup under Advanced in the main menu. The LAN Setup screen displays. Figure 4-1 Configuring a Device Name The device name is a user-friendly name for the router. This name is shown in the Network on Windows Vista and the Network Explorer on all Windows systems. The Device Name field cannot be blank. Th...