Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: NETGEAR Dateigröße: 432.6 kb Dateiname: Unterrichtssprache:

. .20 LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 If You Do Not See All Your Devices with the Powerline Utility. . . . . . . . . .21 Appendix A Supplementary Information Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Safety Information: XAV2001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Appendix B Notification of Compliance 1. Getting Started This chapter describes your XAV2001 Powerline AV Ethernet Adapter, and how your adapter can fit into a home network. For more information about the topics covered in this manual, visit the Support website at Hardware Features The following figure shows the adapter in detail: Ethernet portLEDsSecurity buttonFactory Reset button Figure 1. Adapter LEDs, buttons, and Ethernet port LEDs Table 1. XAV2001 Powerline AV Ethernet Adapter LEDs Item Description Power LED • Solid green. The electrical power is on. • Blinking green. The adapter is in the process of restarting or setting up security. • Amber. The adapter is in power saving mode. The adapter enters power saving mode if the Ethernet port is not linked for more than 10 minutes. • Off. There is no electrical power, or has been turned off through the Powerline Utility. Powerline LED • Solid. The adapter is connected to a Powerline network. • Blinking. The adapter is sending or receiving data. • Off. The adapter has not found any other compatible Powerline devices using the same encryption key. The Pick A Plug feature lets you pick the electrical outlet with the strongest link rate, indicated by the color displayed by the LED. Green: Link rate > 80 Mbps (best) Amber: Link rate > 50 and < 80 Mbps (better) Red: Link rate < 50 Mbps (good) Ethernet LED • Solid. The Ethernet port is linked, but there is no activity. • Blinking. There is traffic on the Ethernet port. • Off. There is no Ethernet connection. Buttons Two buttons are located on the side of the adapter: • Security. If you set security on your other adapters, after you plug your new AV adapter into the wall socket, press its security button for 2 seconds; then press the Security button on any adapter in your existing network for 2 seconds. You need to press both buttons within 2 minutes. Note: The Security button does not work in power saving mode. The unit enters power saving mode if the Ethernet port is not linked for more than 10 minutes. • Factory Reset. Press the Factory Reset button for 1 second, then release to return the Powerline adapter to its factory default settings. Ethernet Port Plug one end of the Ethernet cable that comes with the XAV2001 Powerline AV Ethernet Adapter into this port and the other end either into your router, or into the computer or other peripheral devices. Powerline Adapter Label The product label shows unique details specific to your adapter. The product label is located on the back. The label contains the following information. • Model number • MAC address • Device password • Serial number Powerline Adapter in a Home Network You can use Powerline AV Ethernet Adapters to extend your Ethernet network anywhere in your home using your existing electrical power lines. Ethernet cablesPowerline communicationHere, an Ethernet cable connects the router to the Powerline network. In another room, an Ethernet cable connects a computer to the Powerline network. Figure 2. Powerline network with two Powerline adapters For best performance, plan the location of your Powerline devices (to make a Powerline network, you need at least two Powerline devices): • Use an electrical outlet that is not controlled by a wall switch to avoid someone unknowingly turning off the power to the outlet. • Do not plug in Powerline products to a power strip, extension cord, or surge protector as this might prevent them from working correctly, or reduce the network performance. • Avoid plugging Powerline products into electrical outlets located near an appliance that uses a lot of power, such as a washer or dryer, or a refrigerator. This could potentially prevent the adapters from working correctly, or reduce network performance. Different Powerline adapter models can share the network. All Powerline NETGEAR AV products (models XAV101, XAV1004, XAV2001, XAV2501, and XAVN2001) are compatible. To set up your Powerline network: 1. Make sure that your home router is up and running and that Ethernet wired connections are working. 2. Install the first Powerline adapter connected to your router based on the installation instructions that came in the package. Figure 3. Cable the first Powerline adapter to your router 3. Install the second Powerline adapter, which finds the adapter you just installed. Figure 4. Cable the next Powerline adapter to a computer or other device 4. The two Powerline devices form a Powerline network. 5. Install any additional Powerline adapters that you plan to use. 6. Test to...

Herunterladen

Geben Sie zwei Ziffern: