Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
In addition to the WPN111 wireless security features, you should also configure appropriate LAN network security features such as requiring a user name and password to access the shared resources in your network. v2.0, February 2007 NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual Wireless Network Name (SSID) and Security Settings Print this form, fill in the configuration parameters and put it in a safe place for possible future reference. For an existing wireless network, the person who set up the network will be able to provide this information. • Network Name (SSID): The Service Set Identification (SSID) identifies the wireless local area network. Any (First available network) is the default WPN111 wireless network name (SSID). You may customize it using up to 32 alphanumeric characters. Write your customized wireless network name (SSID) on the line below. Note: The SSID in the wireless access point is the SSID you configure in the wireless USB adapter. For the access point and wireless nodes to communicate with each other, all must be configured with the same SSID. Wireless network name (SSID): ______________________________ • If WEP Authentication is Used. – WEP Encryption key size. Identify one: 64-bit or 128-bit. The encryption key size must the wireless network settings. – Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below. • Passphrase method. ______________________________ These characters are case sensitive. Enter a word or group of printable characters and click the Generate Keys button. Not all wireless devices support the passphrase method. • Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits. Key 1: _____________________________ Key 2: _____________________________ Key 3: _____________________________ Key 4: _____________________________ • If WPA2-PSK or WPA-PSK Authentication is Used. – Passphrase: ______________________________ These characters are case sensitive. Enter a word or group of printable characters. When you use WPA-PSK, the other devices in the network will not connect unless they are set to WPA-PSK as well and are configured with the correct Passphrase. v2.0, February 2007 NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual Setting up WEP Encryption Security Follow the steps below to configure WEP Encryption Security. 1. Run the WPN111 Smart Wizard. a. Make sure the WPN111 software is installed and the WPN111 is connected to the USB port in your computer. b. Use the icon to open the Smart Wizard. The Settings tab page opens. Figure 2-9 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WEP. 3. Select the WEP encryption strength you will use. v2.0, February 2007 NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual • 64-bit WEP data encryption • 128-bit WEP data encryption Note: Larger encryption keys require more processing and may slow the communications response times. 4. Select Create with Passphrase and enter the passphrase. The configuration utility will automatically generate the WEP keys. Note: The characters are case sensitive. Be sure to use the same passphrase for all the wireless devices in the network. If the passphrase method is not available in the other devices, you must manually enter the keys to match exactly what is in the access point and other 802.11b wireless devices. 5. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the configuration utility. Setting up WPA2-PSK Security Follow the steps below to configure WPA2-PSK Security. 1. Run the WPN111 Smart Wizard. a. Make sure the WPN111 software is installed and the WPN111 is fully inserted in a USB port in your computer. v2.0, February 2007 NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual b. Use the icon to open the Smart Wizard. The Settings tab page opens. Figure 2-10 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WPA2-PSK [AES]. For more about WPA2-PSK, see the link to “Wireless Communications:” in Appendix B. 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply and then...