Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Netzwerk - WNCE4004 (1.92 mb)
Netzwerk - WNCE4004 (2.12 mb)
Anleitung Zusammenfassung
Press the WPS button on the router. 4. Go back to the computer that is connected to the Internet adapter, and make sure that you are connected to the wireless network. • When WPS is running, the LED blinks, alternating between green and amber. • If the computer does not connect with WPS, the LED alternately blinks red and green for 5 seconds. • If the computer connects using WPS, the LED switches to show the link quality: solid green, solid amber, or solid red. 3. Troubleshooting Connecting to When I launched my browser, I got an error page. What can I do? • Make sure that you include when you type this URL in the address field of your Internet browser. If you leave it out, you might not be able to connect. • If you started up your computer, connected the Ethernet cable to the Internet adapter, and launched your browser quickly, the computer might still need a couple of minutes to recognize the Ethernet LAN connection. Try launching your browser again. If the problem continues, make sure that your Ethernet cable is securely connected to the Internet adapter and the computer, and that the LED on the computer’s Ethernet port is on. If it is not, reconnect the Ethernet cable, and relaunch your Internet browser. Connecting to Wireless Networks To join a wireless network you need to know its network name (also called the SSID) so that you can select it. If the network is secure, you need to know the passphrase or wireless key. If the Internet adapter does not connect to the network that you chose, the following message displays: Connection was not established to the selected network. If this happens, it could be due to one of these reasons: • If you are unable to join the wireless network, it is possible that the network name, passphrase, or key was typed incorrectly. Click Cancel, use the Smart Wizard to select the network from the list, and retype the passphrase or key. This is case-sensitive. PASSWORD25 is not the same as Password25 or password25. See Using the Smart Wizard to Change the Setup on page 7. • If the Smart Wizard does not find your wireless network (it is not displayed in the Select Existing Network screen) check to see if your wireless network is still up and running. Make sure the router is turned on. If possible, move the Internet adapter closer to the router, and click Try Again. If after repeated attempts to connect you are still seeing this message, you might need to upgrade your router to one that provides greater wireless range, or purchase a range extender to extend its wireless range to your location. • If the Internet adapter LED is red, this could indicate a poor wireless connection, or it could mean that no data is being sent over the wireless link. -First, try using your computer to access the Internet. See if the LED turns a different color when data is sent wirelessly. -If the wireless connection is poor, check the location of the Internet adapter and the router. The best connection is established when there is a clear line of sight between the Internet adapter and the router you are connecting to. Make sure there are no physical obstacles between the Internet adapter and the router, and try to move the Internet adapter closer to the router. A. Factory Settings and Technical Specifications Factory Settings You can use the Reset button located on the label on the bottom of the adapter to return it to its factory settings. Made in ChinaMade in China Figure 3. The Reset button restores factory settings Use a pin or paperclip to press the Reset button and hold it for 5 seconds until the power LED blinks amber. Table 3. Factory Settings Smart Wizard Enabled Wireless Wireless communication Disabled Wireless Network Name (SSID) None (you cannot connect to any wireless network until the setup is complete) Security Disabled Transmission speed Auto1 1 Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate Country/Region United States (varies by region) Operating mode 802 11a, 802.11n, 802.11g, 802.11b Data rate Up to 450 Mbps Technical Specifications Table 4. Feature Description Antenna 1 PCB antennae and 2 external antennas Standards 802.11a, 802.11n, 802.11g, or 802.11b Radio Data Rate Auto Rate Sensing Operating Frequency Ranges – 2.4GHz 2.4 GHz to 2.5 GHz (CCK and OFDM Modulation) Operating Frequency Ranges – 5 GHz FCC 5.18–5.24 + 5.745–5.825 GHz (US) 5.18–5.24 GHz (Europe ETSI) 5.25–5.35 GHz (DFS band) 5.47–5.725 GHz (DFS band) 5600–5650MHz is disabled and unavailable for use CE (Europe ETSI): 5.25–5.35 GHz (DFS band) 5.47–5.725 GHz (DFS band) Power 5V 1A Emissions FCC, CE LAN 10BASE–T or 100BASE–Tx, RJ–45 Operating Environment Operating temperature: 0 to 40. C Encryption WPA2, WPA, WEP B. Notification of Compliance Maximum Wireless Signal Rate Derived f...