Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The ping response should change to “reply.” Figure 4-6 At this point the connection is established. Network Connections and Wireless Security v2.2, December 2005 User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2 You may need to reboot in certain Windows operating systems such as Windows 98SE. Note: If you cannot connect, see “Removing the WG511v2 Software” on page -12. Also, for problems with accessing network resources, the Windows Client and File and Print Sharing software might not be installed and configured properly on your computers. Please see the link to “Internet Networking and TCP/IP Addressing:” on page B-1. Starting a Computer-to-Computer (Ad Hoc) Network Connection 1. On the Settings tab page of the Smart Wizard, select or type the Network Name (SSID). 2. Select the Computer-to-Computer (Ad Hoc) network type. 3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box opens: Figure 4-7 4. In the Start Ad Hoc field, choose the wireless standard (802.11a, 802.11b, or 802.11g) for your Ad Hoc computer-to-computer network. 5. In the Channel field, Automatic should work. If you notice interference problems with another nearby wireless device, select a channel that is not being used by any other wireless networks near your wireless adapter. Use the Networks tab page to identify the channels in use in your area. 6. Click OK. Note: The channel number differs depending on the country. The connection speed automatically defaults to the highest speed. Network Connections and Wireless Security v2.2, December 2005 User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2 Wireless Security Many networks use wireless security to encrypt wireless data communications. If you try to connect to a network with wireless security the Smart Wizard detects it. Before you can use that network you must set up the WG511v2 with exactly the same kind of wireless security settings. The main types of wireless security used for home networks are: • Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK) • Wi-Fi Protected Access Pre-Shared Key (WPA-PSK) • Wi-Fi Protected Access (WPA) • Wired Equivalent Privacy (WEP) For more information about wireless security, see the wireless reference document at: In addition to the wireless security features, networks should use LAN network security features such as requiring a user name and password to access the shared resources in the network. The procedures below explain how to configure the wireless encryption settings of your NETGEAR 54 Mbps Wireless PC Card WG511v2. Using Wireless Security Features You can strengthen the security of your wireless connection by enabling Wired Equivalent Privacy (WEP) encryption of the wireless data communications. Or, you can use WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) encryption. For more information about wireless security, see the Web link to “Wireless Communications:” on page B-1. In addition to the WG511v2 wireless security features, you should also configure appropriate LAN network security features such as requiring a user name and password to access the shared resources in your network. The procedures below show how to set up the WEP encryption settings of your NETGEAR 54 Mbps Wireless PC Card WG511v2. Network Connections and Wireless Security v2.2, December 2005 User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2 Wireless Network Name (SSID) and Security Settings Print this form, fill in the configuration parameters and put it in a safe place for possible future reference. For an existing wireless network, the person who set up the network will be able to provide this information. • Network Name (SSID): The Service Set Identification (SSID) identifies the wireless local area network. Any (First available network) is the default WG511v2 wireless network name (SSID). You may customize it using up to 32 alphanumeric characters. Write your customized wireless network name (SSID) on the line below. Note: The SSID in the wireless access point is the SSID you configure in the wireless PC card. For the access point and wireless nodes to communicate with each other, all must be configured with the same SSID. Wireless network name (SSID): ______________________________ • If WEP Authentication is Used. – WEP Encryption key size. Identify one: 64-bit or 128-bit. The encryption key size must the wireless network settings. – Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption keys. Whichever method you use, record the key values in the spaces below. • Passphrase method. ______________________________ These characters are case sensitive. Enter a word or group of printable characters and click the Generate Keys button. Not all wireless devices support the passphrase method. • Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits. Key 1: _...