Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
For instructions on installing and verifying the Windows NT network driver, refer to “Install the Windows NT Network Driver” on the other side of this guide. These four easy steps are provided for installing your Model GA620 Gigabit Ethernet Card: 1. Verify package contents and hardware and software requirements 2. Install the card 3. Connect the network cables 4. Install the Windows NT Network Driver For further information about your Model GA620 Gigabit Ethernet Card, refer to Reference Guide for the Model GA620 Gigabit Ethernet Card (included on the Model GA620 Gigabit Ethernet Card Driver and Documentation CD). As a last step, in order to receive the maximum warranty protection provided by NETGEAR, be sure to register for the product either online or by mailing in the registration card. To get product support, to register your product online, or to obtain product information and NETGEAR product documentation, direct your Web browser to the Web page at: Note: If your server is operating in a Novell NetWare environment, refer to Reference Guide for the Model GA620 Gigabit Ethernet Card (included on the Model GA620 Gigabit Ethernet Card Driver and Documentation CD). Model GA620 Gigabit Ethernet Card Installation Guide for Windows NT Verify Package Contents and Requirements Verify Package Contents and Requirements Unpack the contents of the package and make sure that you have everything. Installation Model GA620 Gigabit Ethernet Card Driver and Documentation CD Model GA620 Gigabit Ethernet Card guide, Warranty & Owner Registration Card and Support Information Card 8897FA Verify Software Requirements The instructions given in this guide are for using the Model GA620 Gigabit Ethernet Card in a server that has a Microsoft® Windows NT 4.0 operating system. You must have Service Pack 3 installed on your Windows NT server. To download Service Pack 3, go to the Microsoft Web page at: Scroll to Support Drivers, and then scroll to Patches & Service Packs to download Service Pack 3. Verify Hardware Requirements You must have a pentium-based server that: • Meets Windows NT 4.0 software requirements. • Has an open 32-bit or 64-bit PCI expansion slot with bus mastering capability. The Model GA620 Gigabit Ethernet Card delivers 32-bit performance when it is plugged into either slot. Model GA620 Gigabit Ethernet Card Installation Guide for Windows NT Install the Card Install the Card Note: Touch a grounded metal object to free yourself of static electricity before you handle the card. 1. Turn the power off and unplug the power cord from your computer. 2. Remove the PC cover. 3. Choose an available PCI slot (either a 32-bit or a 64-bit slot) and remove the corresponding back plate from the PC chassis. 4. Insert the card into the PCI expansion slot. Note: To avoid damaging any components on the card, handle it by the edges, using your thumbs to push it securely into the PCI slot. Make sure the card is fully inserted into the slot to prevent the PC operating system from freezing at startup. If you are inserting the card into a 32-bit slot, part of the connector edge on the card remains undocked. This situation is normal and does not affect the operation of the card. 5. Fasten the card to the rear of the computer chassis by tightening the screw that is on the PC. 6. Replace the PC cover and reconnect the power cord to the PC. Network card Back plate removed 7983FB Model GA620 Gigabit Ethernet Card Installation Guide for Windows NT Connect the Network Cables Connect the Network Cables Using the appropriate fiber cable (as outlined in one of the tables below), connect the fiber port on a network hub or switch to the port on the card. The port on the card performs autonegotiation and supports full-duplex operation. PC with network card installed Server with Model GA620 Gigabit Ethernet card installed Power plug NETGEAR Model FS509 Fast Ethernet Switch Printer (optional) Fiber port 1 Gbps 50 .m or 62.5 .m multimode fiber cable with duplex SC connector 10/100 Mbps 8898FA Multimode Fiber 62.5/125-Micron* 50/125-Micron* Operating Range 2 to 260 meters 2 to 550 meters * Shortwave laser optics (850 nm) Description of Port LEDs Label Activity Description LINK Blinking slowly On Off The port is disabled. A good link exists on the port. No link exists on the port. DATA Blinking or On Off Data is detected on the port. No data is detected on the port. Model GA620 Gigabit Ethernet Card Installation Guide for Windows NT Install the Windows NT Network Driver Install the Windows NT Network Driver Note: You must install the card (instructions on other side of this guide) before installing the network driver. It is all right if screens appear on your system that are different from those shown in these instructions, but make sure you are prompted for the same information. If you are not prompted for the same information, refer to your Microsoft documentation. 1. Turn on the p...