Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
¦ Automatically negotiated full-duplex operation for all 10/100/1000BASE-T RJ45 ports when connected to other auto-negotiating devices. ¦ Easy management of the switch through several available interfaces: • Switch-web interface —an easy-to-use built-in graphical interface that can be accessed from common Web browsers. • HP Intelligent Management Center (IMC) — allows network administrators to discover and map the switches within their network and launch the built- in graphical interface from within IMC to configure the switches. ¦ Support for up to 4 trunks for the PS1810-8G and up to 12 trunks for the PS 1810-24G so that you can assign physical links to one logical link (trunk) that functions as a single, higher-speed link providing dramatically increased bandwidth. Also known as Link Aggregation. ¦ Support for up to 64 IEEE 802.1Q-compliant VLANs so you can divide the attached end nodes into logical groups that fit your business needs. ¦ Support for many advanced features to enhance network performance—for a description, see the PS1810 Switch Management and Configuration Guide. ¦ Support for downloading new switch software for product enhancements and bug fixes. Installing the switch The HP PS1810 Switches are easy to install. They are packed with accessory kits that allow them to be mounted in a number of different ways. This chapter describes how to install the PS1810-8G and PS1810-24G switches. Included parts The following components are shipped with an HP PS1810 switch: ¦ Documentation kit • Quick Setup Guide and Safety/Regulatory Information • Software License, Warranty, and Support information ¦ Accessory kits: PS1810-24G Switch PS1810-8G Switch Kit number 5066-0620 • three 3/4” (20-mm M4) screws for wall and under-table mounting • three wall anchors Kit number 5066-2506 • two mounting brackets • eight 8-mm M4 screws to attach the mounting brackets to the switch • four 5/8-inch number 12-24 screws to attach the switch to a rack Kit number 5064-4254 • four rubber feet Kit number 5066-0621 • three 3/4” (20-mm M4) screws for wall and under-table mounting • three wall anchors • cable tie for power cord Kit number 5066-3084 • four rubber feet Installing the switch Included parts ¦ PS1810-8G external AC/DC power adapters and power cords: • Universal Inline AC/DC Power Adapter All countries/regions Power Cords for Inline AC/DC Power Adapter Australia/New Zealand Philippines/Thailand China India Indonesia/Israel/Vietnam Japan South Africa South Korea Taiwan United Kingdom/Hong Kong/Singapore/Malaysia Brazil Argentina Chile • Wall Plug-in AC/DC Power Adapters (AC Power cords are not used) United States/Canada/Mexico Continental Europe/Denmark/Norway/Sweden/Switzerland * Complies with Energy Star 5.0 standards. ¦ PS1810-24G Power cords: Australia/New Zealand China Continental Europe Denmark Japan Switzerland United Kingdom/Hong Kong/Singapore/Malaysia United States/Canada/Mexico South Africa South Korea/Indonesia/Vietnam India Israel Philippines/Thailand Taiwan Argentina Brazil Chile J apa n Power Cord Wa r n i n g 8121-0833 8120-8377 8120-6802 8120-6806 8120-6804 8120-6807 8120-8709 8120-6805 8120-6808 8120-6802 8121-0772 8121-1035 8121-0667 8121-0964 8120-6871 8121-1069 8120-6979 5066-1122* 8121-0870 8121-0664 8120-8373 8121-0702 8120-6314 8120-6316 8120-6314 8120-8441 8121-0963 8120-8699 8121-1081 8120-8367 8121-0514 5184-5863* 5184-5864* Installing the switch Included parts Installation precautions Follow these precautions when installing the switch. ¦ When you mount PS1810-8G Switch under HP ProLiant MicroServer WA R N I N G S Gen8s, do not stack more than two servers on top of the switch. ¦ Before you mount the PS1810-24G Switch in a rack or cabinet, ensure the rack or cabinet is adequately secured to prevent it from becoming unstable and falling over. Devices installed in a rack or cabinet must be mounted as low as possible, with the heaviest devices at the bottom and progressively lighter devices installed at the top. ¦ When you mount the switch on the wall, ensure that the network ports are facing up or down to meet national and international safety requirements. The side vents cannot be placed facing up or down. ¦ When installing the switch, ensure that the AC outlet is located near the switch Cautions and is easily accessible in case the switch must be powered off. ¦ Ensure that the AC power source circuits are properly grounded. ¦ Use only the AC/DC power adapter and power cord (if applicable), supplied with the switch. Use of other adapters or power cords, including those that came with other HP Networking products, might result in damage to the equipment. For those switches that use a power cord, if your installation requires a different power cord than the one supplied with the switch, be sure to use a power chord that has the symbol of the safety agency that defines the regulations for power cords in your country. The mark is your assurance that the power cord can be used safely with the swit...