Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
6 Mount your receiver You can either mount the receiver on the wall or on the back of the HDTV. Mount your receiver on the wall 1 Select a spot near the HDTV. 2 Drill two holes in the wall. Make sure that the distance between the two holes is 45mm and the diameter of the hole is 5 mm. 3 Punch the supplied two anchors into the two holes on the wall. 4 Put the two screws into the anchors and leave 3 mm to mount the receiver on. EN English 12 6 Align the adhesive tape on the receiver with the one on the HDTV until both the receiver and HDTV are mounted together firmly. Note •• The use of adhesive tapes is an alternative mounting option when the receiver cannot be fixed. •• When you mount the receiver at the back of the HDTV, avoid blocking the ventilation holes of the HDTV. •• For safety reason, check regularly if the HDTV and receiver are mounted together firmly. Mount your receiver on the back of the HDTV 1 Remove the white protective film from one of the supplied adhesive tapes. 2 Secure the glued side of the adhesive tape and attach it to the central bottom area of the receiver. 3 Select a flat location on the rear side of the HDTV. 4 Remove the white protective film from the other adhesive tape. 5 Secure the glued side of the adhesive tape and attach it to the selected rear side of the HDTV. EN 7 Technical data Supported resolution Video format timings Resolution Primary CEA video Timing 480p 640x480p @ 59.94/60Hz 480p 720x480p @ 59.94Hz 480p 720x480p @ 60Hz 576p 720x576p @ 50Hz 720p 1280x720p @ 50Hz 720p 1280x720p @ 59.94/60Hz 1080i 1920x1080i @ 50Hz 1080i 1920x1080i @ 59.94/60Hz 1080p/60 1920x1080p @50Hz 1080p/60 1920x1080p@59.94/ 60Hz Secondary CEA video Timing 1080p/24 1920x1080p @ 23.98/24Hz 1080p/24 1920x1080p @ 25Hz 1080p/24 1920x1080p @ 29.97/30Hz Product specifications General specification Video resolution HDMI input: 1080p, 1080i, 720p, 576p, 480p Supported audio formats: Digital audio: up to 6 Mbps AC3 and DTS Analog audio: 32-96 KHz and 16-24 bits per audio sample Transmission distance: Maximum 7 meters without obstruction between the transmitter and receiver. Antennas: High performance internal antennas Operating frequencies: 5.15 - 5.35 GHz / 5.470 - 5.725 GHz Power supply: Input: AC 100~ 240V Output: DC 5V, 2A Operating temperature: 0~40°C Transmitter interfaces A/V interfaces HDMI input: One (Type A, Male) Power interface Power input:The USB cable connected to the USB jack of the computer LEDs Status LED: 1 x blue LED Dimensions 30 x 83.3 x 17.5 mm (W x L x H) Receiver interfaces A/V interfaces HDMI output: One (Type A) Power interface Power input: 5V DC jack Switches Front power switch: One Info switch: One LEDs Power LED: 1 x LED (Two Tone: Blue & Red) Status LED: 1 x blue LED Signal quality status: On-screen display Dimensions 194.8 x 146.8 x 31 mm (W x L x H) English EN 13 8 Notice Declaration of conformity Hereby Philips Consumer Lifestyle, declares that the SWW1890 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.You can find the Declaration of Conformity on philips.com. EN 60950-1 Safety of Information Technology Equipment EN 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) EN 301 893 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of ar ticle 3.2 of the R&TTE Directive EN 301 489-1 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and ser vices; Par t 1: Common technical requirements EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and ser vices; Par t 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment Hereby, Philips, declares that this SWW1890 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessar y health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate fur ther developments in standardisation for early int...