Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Emerson Process Management Dateigröße: 212.18 kb Dateiname: Unterrichtssprache:

For most applications, the ACCOL Translator will reduce the conversion effort by up to 80% vs. rewriting the program. To properly take advantage of the ACCOL Translator, one must know ACCOL, ControlWave Designer, understand the ACCOL application and have access to the ACCOL source file. Once the application is translated, it typically requires some degree of editing, depending on the complexity of the program, and thorough testing prior to deployment on-site. Emerson Process Management can provide you with training to do the translation or you can rely on our Application Support Group to do the translation for you. Specifications CW_10, CW_30, and CW_35 CPU • 32 bit, 150 MHz ARM processor • Memory battery backup: 7000 hours • Optional one or two independent 10/100 Base- T ports with RJ-45 connectors (CW_30 and CW_35 only) • Ethernet port isolation: 500 Vdc • One 3 pin Utility Port for Flash downloading system flashware • System Watchdog relay on CW_10 MFIB • LED status indicators – 6 failure status LEDs, Watchdog and Idle and communication LEDs Memory • Program execution: 4 MB SD RAM • Data Memory : 1 MB SRAM battery backed memory • File and Historical Archive memory: 16 MB onboard flash CW_10 Serial Communication Ports • 4 Serial communication ports: Located on the MFIB: 9 pin ‘D’ connectors with standard 33XX pin out • Ports A & C: RS232 – 115.2 K baud • Port B: Configurable Modem/RS485 – 115.2 K baud. Supports all existing 3310 private and switched network modems • Port D: RS485 – 115.2 K baud, multi-drop up to 32 nodes • ESD protection on RS 485 ports -IEC 801 CW_30 and CW_35 Serial Communication Ports • 2 Serial communication ports: BIP ports. (On CW_30 only BIP ports extended from CPU board and mounted on an external bracket) • BIP ports are configurable RS232/RS485 – 115.2 K baud • BIP ports are 9 pin ‘D’ connectors with standard 33XX pin out • ESD protection on RS 485 ports -IEC 801 CW_30 and CW_35 Serial Communication Card • 2 port and 4 port serial communication cards available Remote Automation Solutions Product Data Document 420ds9b July 10, 2007 - Page 3 ControlWave Upgrade Kits • 2 port comm card supports existing comm options (MIB, TIB, RDI, 1200/9600B Modems) on port B • Configurable RS232/RS485 – 115.2 K baud • Serial ports are 9 pin ‘D’ connectors with standard 33XX pin out • ESD protection on RS 485 ports -IEC 801 Keypad/Display Support The CW_10, CW_30, and CW_35 CPUs support the local 33XX local and remote Keypad/Display units via existing display interface connections. The CW_30 and CW_35 also support the ControlWave 2-button and 25 button Display/Keypad units via standard Cat-5 cable with RJ-45 connectors. Environmental Specifications • Operating Temperature range: -40 to 70oC (-40 to 158oF), storage up to 85oC • Relative Humidity: 15-95% non-condensing • Vibration: 1.0g for 10-150 Hz -0.5g for 150Hz to 2000Hz • RFI Susceptibility: 3V/m – 80 MHz to 1000Mhz (EN50082-2) Power Consumption • CPU without Ethernet: 2 watt • CPU with 1 Ethernet: 3 watt • CPU with 2 Ethernet: 4 watt • MFIB (Watchdog off): 1 watt • MFIB (Watchdog on): 1.9 watt • CW_XX 2 port comm.: 0.5 watt • CW_XX 4 port comm.: 1 watt Hazardous Area Approvals • FM approved as non-incendive for operation in Class I, Division 2 hazardous areas Ordering Information 3310 Upgrade Kits CW_10 Kit -12 Vdc includes CPU & MFIB: 396807-01-1...

Herunterladen

Geben Sie zwei Ziffern: