Stimmen - 5, Durchschnittliche Bewertung: 3.6 ( )

Hersteller: ADC Dateigröße: 137.86 kb Dateiname: bb395513-2929-49cd-a675-d5a209dda8b7.pdf Unterrichtssprache:

Parameter Description N/A 3.3.2.8 Command Name Command Description DumpMiscInfo Use this command to display information of miscellaneous settings. Parameter Description N/A 3.3.2.9 Command Name Command Description DumpDriveInfo Use this command to display information of all drives. Parameter Description N/A ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 16 OF 27 3.3.3 Basic Array Configuration Commands 3.3.3.1 Command Name Command Description CreateArray Use this command to create an array with specified RAID level. Parameter 1 Parameter Description RAID Level: > RAID Level: R0: RAID Level 0 R1: RAID Level 1 R5: RAID Level 5 R6: RAID Level 6 R01: RAID Level 0+1 Stripe Size: Measures in KB. 1 KB=2 Blocks. Initialization Type: Fly: On-the-fly initialization Evaluation: Performance evaluation Member Drives: Drive= where z1, z2, x and y stand for drive numbers and y must be larger then x. Parameter 2 Stripe Size: > Parameter 3 Initialization Type: > Parameter 4 Member Drives: > Example CLI>CreateArray Level=R5 Stripe=128 Type=Fly Drive=3,4,6~8 [Enter] Array will be created with drive 3,4,6,7,8 with an unused array number if all specified drives are available. If all array numbers have been used CLI will reply error. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 17 OF 27 3.3.3.2 Command Name Command Description DeleteArray Use this command to delete a specified array. Parameter 1 Parameter Description Array No.: <1~4> Array No.: Specify an array number to be deleted. Example CLI>DeleteArray 1 [Enter] Array 1 will be deleted if it exists and is not in use. 3.3.3.3 Command Name Command Description CreateJBOD Use this command to create JBOD with the specified drive number. Parameter 1 Parameter Description Drive No.: Drive No.: <1~n> <1~n>, where n stands for maximum available drive number. 3.3.3.4 Command Name Command Description DeleteJBOD Use this command to delete an existing JBOD. Parameter 1 Parameter Description JBOD No.: JBOD No.: <1~n> <1~n>, where n stands for maximum JBOD number. 3.3.3.5 Command Name Command Description SetSlice Use this command to set a slice for the specified array. Parameter 1 Parameter Description Array No.: > Array No.: Specify an array number to set slice. Slice Number: Specify the slice number to be created. Slice size: Measures in GBytes. Set “Size=0” to delete a slice. Parameter 2 Slice Number: > Parameter 3 Slice size: > Example CLI>SetSlice Array=1 Slice=0 Size=120 [Enter] Slice 0 will be set to 120GB if Array 1 exists and the free capacity of Array 1 is large enough(>120GB). ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 18 OF 27 3.3.3.6 Command Name Command Description SetLunMap Use this command to set a Lun Map for an existing slice or JBOD. Parameter 1 Parameter Description LUN No.: > LUN No.: Specify the Lun number to be mapped. Array No.: Array =1~4, Maps Lun to a specified Array JBOD=1~n, Maps Lun to a specified JBOD Slice No.: This parameter is not needed when parameter 2 uses JBOD. Parameter 2 Array No.: : JBOD= <1~n>> Parameter 3 Slice No.: > Example CLI>SetLunMap Lun=0 JBOD=1 [Enter] Lun 0 will be mapped to JBOD1 if it exists. CLI>SetLunMap Lun=0 Array=1 Slice=0 [Enter] Lun 0 will be mapped to slice 0 of array 1 if it exists. 3.3.3.7 Command Name Command Description DeleteLunMap Use this command to delete an existing Lun Map. Parameter 1 Parameter Description LUN No.: Lun No.: <0~63> Specify the Lun number to be unmapped. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 19 OF 27 3.3.4 Advanced Array Configuration Commands 3.3.4.1 Command Name Command Description ExpandArray Use this command to expand an array with specified drive count. Parameter 1 Parameter Description Array No.: > Array No.: Specify an array number to be expanded. Drive Count: Specify how many drives will be expanded to the array. Drive Count must not be larger then the number of spare drives. Parameter 2 Drive Count: > Example CLI>ExpandArray Array=1 DriveCnt=3 [Enter] Array 1 will be expanded with 3 drives if Array 1 exists and the spare drive quantity are more then or equal to 3. 3.3.4.2 Command Name Command Description MigrateArray Use this command to migrate an array from the original RAID level to a specified RAID l...

Herunterladen

Geben Sie zwei Ziffern: