Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
02 June 24, 1998 Modified front panel and cover. Changed deployment rules. (150-409-100-02) 03 July 14, 1998 Corrected CLEI Code. (150-409-100-03) 04 December 18, 1998 Corrected CLEI Code; new LED indication for margins. (150-409-100-04) 05 December 13, 1999 Added PG-Flex Fault applications and expanded the thermal deployment rules. (150-409-100-05) 01 April 30, 2003 Rebranded PairGain document 150-409-100-05 to new catalog number and updated to include List 3. Copyright April 30, 2003 © 2003 ADC DSL Systems, Inc. All rights reserved. Trademark Information ADC is a registered trademark of ADC Telecommunications, Inc. HiGain and PG-Flex are registered trademarks of ADC DSL Systems, Inc. No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademark. Other product names mentioned in this document are used for identification purposes only and may be trademarks or registered trademarks of their respective companies. Disclaimer of Liability Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied, reproduced or disclosed in whole or in part without the written consent of ADC. Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of liability applies to all products, publications and services during and after the warranty period. April 30, 2003 HDU-409 Lists 1, 2, and 3 LTPH-UM-1234-01 Using This Manual USING THIS MANUAL The following conventions are used in this manual: • Monospace type indicates screen text. • Keys you press are indicated by small icons such as Y or ENTER . Key combinations to be pressed simultaneously are indicated with a plus sign as follows:. • Items you select are in bold. The following types of messages, identified by icons, may be included in text: Notes provide information about special circumstances. +CTRL ESC General cautions indicate the possibility of personal injury, product failure, or equipment damage if instructions are ignored or not completely followed. An Electrostatic Discharge (ESD) caution indicates that a device or assembly is susceptible to damage from electrostatic discharge. An electrical shock caution indicates the presence of a dangerous level of electrical power and the potential for serious personal injury or equipment damage. A laser caution indicates the potential for permanent eye damage or blindness due to direct exposure to laser beams. For a list of abbreviations used in this document, refer to “Appendix E Glossary” on page 34. HDU-409 Lists 1, 2, and 3 April 30, 2003 Unpack and Inspect Your Shipment LTPH-UM-1234-01 UNPACK AND INSPECT YOUR SHIPMENT Upon receipt of the equipment: • Unpack each container and inspect the contents for signs of damage. If the equipment has been damaged in transit, immediately report the extent of damage to the transportation company and to ADC DSL Systems, Inc. Order replacement equipment, if necessary. • Check the packing list to ensure complete and accurate shipment of each listed item. If the shipment is short or irregular, contact ADC DSL Systems, Inc. as described in “Appendix D - Product Support” on page 32. If you must store the equipment for a prolonged period, store the equipment in its original container. April 30, 2003 HDU-409 Lists 1, 2, and 3 LTPH-UM-1234-01 Table of Contents TABLE OF CONTENTS Overview _______________________________________________ 1 Features ________________________________________________ 2 Product Description ______________________________________ 3 Applications ____________________________________________ 6 PG-Flex Deployment _____________________________________ 7 Generic Information______________________________________ 9 Doubler Enclosure Capacities with Full Solar Load................ 9 Alternative Doubler Enclosure Capacities............................. 16 Mixing HiGain Doublers ....................................................... 18 Micro Doubler Capacity Deployment Rules.......................... 18 Installation ____________________________________________ 20 Loopback Operation in HiGain Systems ____________________ 22 Appendix A - Functional Description_______________________ 25 Appendix B - Specifications_______________________________ 27 Appendix C - Ground Faults______________________________ 29 Ground Fault Detection.......................................................... 29 HiGain Fault Isolation............................................................ 30 PG-Flex Fault Isolation.......................................................... 31 Appendix D - Product Support _________...
Dieses Handbuch ist für folgende Modelle:Netzwerk - and 3 Doubler (238.41 kb)