Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Helpful Hint 10 Hookups with a Stereo TV antenna or cable to ANT(enna) IN Jack Video Cable Stereo Audio Cable VIDEO (yellow) and AUDIO (red and white) OUT Jacks Audio and Video IN Jacks on TV 1 2 3 VR602BMG l Audio and Video cables are not supplied. VIDEO INOUT CH3 CH4 AUDIO OUT IN ANT antenna or cable to ANT(enna) IN Jack Video Cable VIDEO (yellow) and AUDIO (white) OUT Jacks 1 2 VR402BMG 3 Audio and Video IN Jacks on TV Audio Cable 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connectthe other end of the video cable to the VIDEO IN Jack on your TV. 3 VR602BMG: Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the VCR, matching cable colors to the jack colors. Then, connect the other end of the audiocable to the AUDIO IN Jacks on your TV, again matching cable colors to the jack colors. VR402BMG: Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. (If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.) This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off). 4 Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details. 22 Front Panel PAUSE Button While recording, press to pause the recording. Press again to resume recording. Details are on page 25. You can not pause a One-Touch Recording. During tape playback, press to freeze the Use to watch a tape, to watch a program while recording it, or to watch a TV program (changing channels at the VCR). When the VCR Light appears on the display panel, the VCR is in VCR position. . TV Position Use to watch TV (changing channels at the TV) or to watch one program while recording another. When the VCR Light does not appear on the display panel, the VCR is in TV position. STATUS/EXIT Button Press to access or remove the on-screen status display. Details are on page 20. Press to exit on-screen menus. picture. Press again to resume playback. Details are on page 36. POWER Button Press to turn the VCR power on and off. VCR/TV Button Press to select VCR or TV position. l VCR Position REC(ord)/OTR Button Press once to start a recording. Press repeatedly to start a One-Touch Recording. Details are on page 27. CHANNEL (p/o ) Buttons Press to change channels at the VCR. Or, press to adjust the tracking of a tape during normal playback or slow motion play- back. Also, press to remove vertical jitter in a Still picture. PLAY Button Press to play a tape. Press to release Slow, Search, or Still mode and return to playback. Details are on page 36. Press to select an item in the menu. REW(ind) Button When playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stays on the screen. Details are on page 36. Press to return to a previous menu. STOP/EJECT Button Press once to stop the tape. When playback is stopped, press to eject the tape. Press to select an item in the menu. F.FWD (Fast Forward) Button When playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 36. Press to advance to the next menu or to change the setting of an item in the menu. VIDEO AUDIO POWER VCR/TV CHANNEL STATUS/EXIT MENU PAUSE REC/OTR F.FWD REW PLAY STOP/EJECT L R Remote Sensor Receives a signal from your remote control so you can operate your VCR from a distance. VR602BMG AUDIO In Jacks Connect audio cables coming from the audio out jacks of a camcorder, another VCR, or an audio source here. Details are on page 32. The VR602BMG is shown here. The VR402BMG has only one AUDIO IN jack. VIDEO In Jack Connect a cable coming from the video out jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.) here. Details are on page 32. MENU Button Press to access the VCR menu. Rear Panel 23 ANT(enna) IN Jack Connect your antenna or cable here. Details are on pages six-10. AUDIO IN Jacks Connect audio cables coming from the AUDIO OUT Jacks of a camcorder, another VCR, or an audio source here. Details are on page 32. The VR602BMG is shown here. The VR402BMG has only one AUDIO IN jack. AC Power Cord Connect to a stan- dard AC outlet to supply power to the VCR. AUDIO OUT Jacks Connect audio cables going to the AUDIO IN Jacks of a camcorder, another VCR, or an audio system here. Details are on pages 32 and 38. The VR602BMG is shown here. The VR402BMG has only one AUDIO OUT jack. VR602BMG VIDEO OUT Jack Connect a video cable going to the VIDEO IN Jack of a camcorder, another VCR, or an a...
Dieses Handbuch ist für folgende Modelle:Netzwerk - VCRVR402BMG (673.66 kb)