Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
This switch integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly fexible mini package. P/N:19G7MSW1G5+7G5G The Switch's Ports The Switch's Indicator LEDs Ports 1-5 At the rear site ofthe Switch, ports 1-5 are where you will connect your Computers to the Switch Power At the left site of the Switch, the power port is where you will connect the AC power adapter. Be sure to only use the AC power adapter that came with the Switch. Connect Computers to the Switch The 5 UIP/STP ports support automatic MDI/MDIX crossover detection function f gives true ‘plug and play’ capability, with — _ a the Auto-MDI function, you just need to plug-in the network cable to the switch directly and no need to care if the end node is MC (Network Interface Card) or switches and hubs. Powering on the Switch Connect the Switch’s AC power adapter to the Switch’s Power port. Plug the other end ofthe adapter into an AC outlet. When connected the AC power adapter to the switch’s Power port and AC outlet will immediately power on this Switch. When the Switch installation was completed, check on the LED indicators for the status. POWER This indicator lights green when the switch is receiving power. Link/ACT This indicator light green when the port is connected to a station, ifthe indicator blinking will be transmitting or received data on the network. Technical Specifications Standards IEEE 8Q2.3 1QBASE-T IEEE 8Q2.3u 1QQBASE-TX IEEE 8Q2.3x Full-duplex flow control Ports 5 x UTP/STP Auto-MDIX ports Transfer Rate Ethernet 1QMbps/2QMbps Fast Ethernet 1QQMbps/2QQMbps Performance Non-blocking full wire speed Power 7.5VDC/1A EMI FCC Class B/CE Mark B/VCCI-B...