Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
14 Key Value: Enter the applicable key values. Up to four key values may be entered. Note the following rules when entering Key values: . 64-bit key length requires 10 Hexadecimal characters (0-9, A-F) or 5 ASCII characters (any number or letter). . 128-bit key length requires 26 Hexadecimal characters (0-9, A-F) or 13 ASCII characters (any number or letter). . 256-bit key length requires 58 Hexadecimal characters (0-9, A-F) or 19 ASCII characters (any number of letter). After you have applied the changes, return to the utility’s main screen and select the wireless router/access point you wish to connect to. Click Yes at the Use Previous WEP Setting dialog box to connect to the encrypted wireless router/access point. If you want to use WPA encryption, click on Change in the General Connection Setting. 15 1. Select TKIP for Encryption, WPA PSK for Authentication Mode, and click Apply. 2. Click on WPA Encryption Setting and click Change. 3. Enter the appropriate passphrase in the Passphrase field under the Pre-shared Key section and click Apply. (The passphrase must be identical to the passphrase set on your wireless router/access point and it has to be between 8 to 63 ASCII characters long). 16 3.3 Configuring Profile After you have configured all the settings, you can save your settings as a profile so you don’t have to re-configure them the next time. Type in a name for the profile in the Profile name field and click Save Current. To load a profile, select the profile from the drop-down menu and click Load. To delete a profile, select the profile from the drop-down menu and click Delete. 17 3.4 Advanced Settings Click on Advanced Setting from the More Setting window to configure the adapter’s advanced settings. User Interface: select the language for the adapter’s user interface. Power Consumption Setting: • Continuous Access Mode: provides the best signal throughput but least power save. • Maximum Power-Saving Mode: provides the best power save but least throughput. • Fast Power-Saving Mode: provides average power save and throughput. Country Roaming: select the country you are in. • World Mode: the adapter will get its country setting from the access point. • User Select: choose your country. Fragmentation Threshold: choose from 256 to 2346 bytes. RTS/CTS Threshold: choose from 0 to 2347 bytes. 18 3.5 Information Click on Information from the More Setting window to view the driver and utility’s information. 19 4. Configuring USB Adapter as an Access Point 4.1 Configuring Access Point You can configure the USB Adapter as an access point for other wireless clients on your network. Note: You will not be able to access the Internet if you configure the USB adapter as an access point. To allow other wireless clients to access the Internet, you will need to configure your computer as a router and a DHCP server. The vendor will not provide any technical support in regards to the USB adapter functioning as an access point. Select Access Point from the Mode drop-down menu. The default settings for the access point are as follows: Channel: 6 SSID: WLAN_AP WEP: Disable Tx Power: Level 0 To configure the access point, click on More Setting. 20 Click on Change to configure the settings. Channel: select the channel you want to use. Basic Rate: select the applicable transfer rate. Tx Rate: select from Auto to 54 Mbps. SSID: enter the desired SSID for the access point. Hide SSID (check box): check to disable the broadcast of SSID. Tx Power: select the transmission signal power. Click Apply to submit the changes. Bridge Adapter: If you have another Ethernet card installed in your computer, you can select the other Ethernet card as the bridge adapter. This will allow any wireless client that is connected to the access point to be bridged to the wired network that the other Ethernet card is connected to. 21 4.2 Configuring Encryption Security Select Enable from the WEP drop-down menu and click Setting. Key Length: Select the appropriate encryption key length. Default Key ID: Select which of the four Key Value you want to use. Key Format: Select either Hexadecimal (0-9, A-F) or ASCII (any number or letter). Key Value: Enter the applicable key values. Up to four key values may be entered. Note the following rules when entering Key values: • 64-bit key length requires 10 Hexadecimal characters (0-9, A-F) or 5 ASCII characters (any number or letter). • 128-bit key length requires 26 Hexadecimal characters (0-9, A-F) or 13 ASCII characters (any number or letter). • 256-bit key length requires 58 Hexadecimal characters (0-9, A-F) or 19 ASCII characters (any number of letter). Authentication Mode: select from Open System or Shared Key. Fragmentation Threshold: choose from 256 to 2346 bytes. RTS/CTS Threshold: choose from 0 to 2347 bytes. Preamble: select Long or Short. MAC Address Filter: click Setting. 22 4.3 Configuring MAC Address Filter Filter Type: Disable: disables MAC address filter. Accept: only accepts connection from th...